User Manual

KONG DRUM DESIGNER
(RECORD+REASON)
745
D To assign a Hit Type to a pad, select the pad and then select Hit Type by clicking the Hit Type button (or on the
name in the display).
The Hit Type assignment is saved when you save your Kong Kit Patch and/or song.
Assigning Hit Type to Pads using the Quick Edit function
A quicker way of assigning Hit Type to several pads is by using the Quick Edit function.
1. Click the Quick Edit button in the Hit Type section.
Each Pad now shows the current Hit Type assignment.
2. Change the Hit Type assignment clicking on the desired Hit Type number on each Pad.
3. When you are done, click the Quick Edit button or press [Esc] to exit.
Muting and Soloing Pads
D Click the Mute button to mute the assigned Drum for the selected Pad.
This will also mute MIDI control of the assigned Drum. Muted pads are displayed in red color.
D Click the Solo button to solo the assigned Drum for the selected Pad.
Soloed pads are displayed in green color. All other pads are automatically muted. This also affects MIDI control of
the Drum channels.
D Click the CLR button to remove all Mute and Solo assignments.
Muting and Soloing Pads using the Quick Edit function
A quicker way muting and soloing several pads is by using the Quick Edit function.
1. Click the Quick Edit button in the Hit Type section.
Each Pad will now show a Mute and Solo button.
2. Click the Mute and/or Solo buttons on the desired Pads.
3. When you are done, click the Quick Edit button to exit.