User Manual

KONG DRUM DESIGNER
(RECORD+REASON)
752
Loading and Saving Drum Patches
Loading and Saving Kong Drum patches (“.drum”) are done in the same way as with any other Record or Reason de-
vice - see “Loading patches” and “Saving patches”.
A Kong Drum patch contains all parameter settings on the Drum Control Panel, including modules and parameter
settings in the Drums and FX section - with references to any used samples.
It’s also possible to load samples and REX loops in the Drum Control Panel section. Loading a sample will automati-
cally open it in an NN-Nano Sampler module (see “NN-Nano Sampler”) and loading a REX file will automatically open
it in a Nurse Rex Loop Player module (see “Nurse Rex Loop Player”).
Sampling in Kong
The sampling procedure is the same for all devices that can sample (Kong, NN-19, NN-XT and Redrum). The sam-
pling and sample editing procedures are described in detail in the “Sampling (Record+Reason)” chapter.
D To sample your own sound and automatically load it into an NN-Nano Sampler module in the Drum and FX
section, click the Sample button for the desired Drum channel.
Refer to the “Sampling (Record+Reason)” chapter for details on how to set up and use the sampling feature.
The Drum Module slot
Each Drum channel in Kong has a main module slot - the Drum Module slot - to which you can load one of 9 different
types of drum sound modules for designing drum sounds.