User Manual

KONG DRUM DESIGNER
(RECORD+REASON)
753
D Select Drum Module type by clicking the button to the right of the On button and selecting the module from the
pop-up.
the following Drum Module types can be selected: NN-Nano Sampler, Nurse Rex Loop Player, Physical Bass
Drum, Physical Snare Drum, Physical Tom Tom, Synth Bass Drum, Synth Snare Drum, Synth Tom Tom and Synth
Hi-Hat. See “The Drum modules” for details about each Drum module.
! Note that only four pre-defined parameters per Drum Module can be automated!
At the bottom below the Drum Slot is the Pitch Bend Range parameter which controls the Pitch Bend Range for
the Drum Slot. This parameter is global for all types of Drum Modules but is unique to each of the 16 Drum chan-
nels.
The Pitch Bend Range knob for each of the 16 Drum channels
The FX slots
Each Drum channel also has 2 insert effect slots - the FX 1 and FX 2 Slots - to which you can load one of two dif-
ferent types of support sound generators or one of 9 different effect modules.
D Select Module type by clicking the button to the right of the On button and selecting module from the pop-up.
the following module types can be selected for the FX 1 and FX 2 Slots: Noise generator, Tone generator, Room
Reverb, Transient Shaper, Compressor, Filter, Parametric EQ, Ring Modulator, Rattler, Tape Echo and Overdrive/
Resonator. See “The Support Generator modules” and “The FX modules” for details about each module type.
! Note that only two pre-defined parameters per FX/Support Generator Module can be automated!
• For the Bus FX and Master FX slots, all module types except the Noise and Tone generators can be selected.