User Manual

KONG DRUM DESIGNER
(RECORD+REASON)
756
D To sample your own sound and automatically load it into the NN-Nano, click the Sample button.
Refer to the “Sampling (Record+Reason)” chapter for details on how to set up and use the sampling feature.
The Edit Sample button
If you click the Edit Sample button with a sample selected in the display, the sample will open in the generic Edit
Sample window. In this window you can edit the sample and save as a self-contained Song Sample. See “The Edit
Sample window” in the Sampling chapter for details about editing samples.
Sample parameters
There are a number of parameters that are unique to each individual sample and Hit in the NN-Nano. These param-
eters are visible in the display for the selected (highlighted) sample:
•Velocity
The Velocity range can be set, either by clicking and dragging the Velocity bar sideways to the right of the sample,
or by clicking and dragging the Vel Lo and Hi values vertically at the bottom of the display.
• Level
Set the sample level by clicking and dragging the Level value up or down in the display.
•Pitch
Set the sample pitch by clicking and dragging the Pitch value up or down in the display.
•Alt
Click the Alt box for several samples in the same Hit to make them play back alternating.
•Hit Name
Edit the Hit Name if you like by clicking in the Hit Name box, typing in a new name and then pressing [Enter]. The
name will appear in the Hit Type display on the main panel (see “Assigning Hit Type to Pads”).