User Manual

KONG DRUM DESIGNER
(RECORD+REASON)
762
Editing Slice Parameters
In the REX loop display you can edit parameters that are unique to each separate slice:
Slices parameters for a loaded REX loop
D To select a slice for editing, click on the desired slice in the REX loop display.
Alternatively, click and drag up/down in the Slice number box or use the Slice Select knob below the Slice item.
The Slice Parameters are:
•Trig
Click the Trig check box for the slices you want to alternate between using the Slice Trig Hit Type.
•Pitch
Set the pitch for each individual slice in the REX loop by clicking and dragging the Pitch value up/down.
• Level
Set the level for each individual slice in the REX loop by clicking and dragging the Level value up/down.
• Reverse
Click the Reverse box for the slices you want to play back backwards.
The Nurse Rex panel parameters
On the Nurse Rex panel you can edit parameters that are common to all slices in the loaded REX loop:
•Env Type
Sets the amplitude envelope type to “Gate” or “ADSR” (Attack, Decay, Sustain, Release). In Gate mode, the gate
time is set with the Decay parameter.
• Attack with Velocity control
Sets the attack time for the amplitude envelope when ADSR is selected as Env Type. The attack time can also be
velocity controlled according to the sensitivity set with the Vel knob.
• Decay with Velocity and Modulation controls
Sets the decay time for the amplitude envelope when ADSR is selected as Env Type. When Gate is selected as
Env Type, the Decay parameter sets the gate time. The decay/gate time can also be velocity controlled according
to the sensitivity set with the Vel knob. You can also control the decay/gate time from the Mod Wheel with the
amount set with the Mod knob.
•Sustain
Sets the sustain level of the amplitude envelope when ADSR is selected as Env Type. In Gate mode, the Sustain
parameter has no effect.
Slice parameters