Manualshelf

User Manual

ManualsBrandsPropellerhead ManualsAudio SoftwareRecord 1.5 PC / MAC - AUDIO PRODUCTION SOFTWARE
771772773774775776777778779780
Table Of Contents
KONG DRUM DESIGNER
(RECORD+REASON)
773
•Frequency
Sets the center frequency of the equalizer.
•Gain
Sets the amplification (positive Gain value) or attenuation (negative Gain value) around the center Frequency.
•Q
Sets the bandwidth around the center Frequency, from wide to a narrow peak.
Ring Modulator
The Ring Modulator takes the input signal and multiplies it with an internal sinewave signal. The result is often a syn-
thetic metallic sound. The Ring Modulator also features a MIDI controlled envelope generator for sweeping the inter-
nal sinewave frequency. When used in the Bus FX Slot, MIDI Note E2 (#52) trigs the envelope. When used in the
Master FX Slot, MIDI Note F2 (#53) trigs the envelope. The parameters are as follows:
•Frequency
Sets the frequency of the internal sinewave oscillator. The higher the frequency, the higher the resulting output
signal pitch.
•Amount
Sets the level of the internal sinewave oscillator. The higher the level, the more the ring modulation effect.
• MIDI Trig EG Amount
This sets the amount of the MIDI controlled envelope. The Amount value is bipolar (+/-). Set to a positive value, the
envelope will sweep the internal sinewave oscillator frequency from a high value down to the set Frequency value.
Set to a negative Amount, the envelope will sweep the oscillator frequency from a low value up to the set Fre-
quency value. The Amount is not affected by velocity.
• MIDI Trig EG Decay
This sets the MIDI controlled envelope decay time.