User Manual

SCREAM 4 SOUND DESTRUCTION UNIT
810
Cut section (EQ)
The sliders in the Cut section are tone controls, allowing you to cut or boost the level by up to 18dB in the low, mid
and high frequency areas. The Cut section is activated with the Cut button above the sliders.
Move the slider from the middle upwards to boost the level, and from the middle downwards to cut the level of the
corresponding frequency area.
Body section
The Body section is just what it says - it places the sound in a resonant “body”. Depending on the settings, the result
can be similar to a speaker cabinet simulator, an auto-wah effect, or effects with no real-world counterpart. The sec-
tion is based on 5 basic body types, which simulate how a sound is affected by different physical enclosures. The size
and resonance of the Body types can be changed, and the section also features an envelope follower.
Warp Warp distorts and multiplies the incoming signal with itself.
- The P1 knob controls Sharpness. Lower values will produce a soft, compressed distortion, while higher
values produces more harmonics and a sharper sound.
- An effect of multiplying a signal with itself is that the fundamental pitch is removed from the signal, leav-
ing overtones only. The P2 knob controls Bias - raise this to reintroduce the fundamental pitch in the
sound.
Digital Lo-fi anyone? This reduces the bit resolution and sample rate for raw and dirty sounds or for emulating
vintage digital gear.
- The P1 knob controls (bit) Resolution. If the knob is turned fully to the right there is no bit reduction, fully
the left the resolution is 1-bit.
- The P2 knob controls the sample rate. If the knob is turned fully to the right the sample rate is not re-
duced; turning it to the left gradually reduces the sample rate.
Scream Similar to Fuzz, but with a bandpass filter with high resonance and gain settings placed before the distor-
tion stage.
- The P1 knob controls the basic tone of the effect. Turn clockwise for a brighter sound.
- The P2 knob controls the filter frequency. The high resonance setting of the filter makes it suitable for
wah-wah effects.
|
Type
|
Description