User Manual

NEPTUNE PITCH ADJUSTER AND VOICE SYNTH
841
D You can also define your own custom scale by clicking on the keys in the display.
Selected notes in your custom scale will be indicated with green LEDs:
A custom scale containing the notes D, G and A.
When you set your own scale both the Root Key and Scale displays will switch to show “--”.
• The set Key and Scale is automatically repeated for every octave throughout the entire note range.
! Note that this doesn't necessarily need to be an actual scale - sometimes you may only need to activate one or
two notes, passing the other notes through, uncorrected.
Setting Catch Zone Size
The Catch Zone Size parameter defines what pitches in each octave should be “caught” and adjusted towards the
closest Target Notes.
! Any Catch Zone Size settings changes you make are automatically stored in the currently selected Scale Mem-
ory slot in real-time, see “About the Scale Memory”.
The Catch Zones are shown as boxes above each selected note in the keyboard display:
The Catch Zones for the notes in a custom scale with notes D, G and A selected.
• The Catch Zone size is set with the Catch Zone Size knob.
The range is ±20 to ±600 cent, set in 20 cent steps. The range is always centered around the selected notes in
the scale and the default value is ±100 cents.
! Pitches outside or in-between Catch Zones are not caught and adjusted, but let through unprocessed.