User Manual

NEPTUNE PITCH ADJUSTER AND VOICE SYNTH
851
Pitched Signal
This slider controls the total output volume of the Pitch Adjust, Transpose and Formant sections routed to the Left
and Right outputs (see “Audio Out”).
Voice Synth
This slider controls the output volume of the Voice Synth routed either to the main Left and Right outputs or to the
separate Voice Synth Left and Right outputs if these are connected (see “Voice Synth Out”).
! Note that the Voice Synth function must be activated, otherwise this control will have no effect - see “Using the
Voice Synth”.
Connections
Flipping the Neptune around reveals an array of connection possibilities. Some of these are CV (control signal) re-
lated and some are audio signal related.
Sequencer Control
Note
The Note input allows you to control the pitch of either the Pitch Adjust or Voice Synth (depending on what is cur-
rently selected in the MIDI Input section - see “MIDI Input”). The pitch could be controlled from a Note CV output of a
Matrix or an RPG-8 (Record+Reason), for example.
! A Gate signal on the Gate input (see below) must also be present for the Note Input to work.
Gate
The Gate input should be used in combination with the Note modulation input (see above). As soon as a gate signal
is present, any note modulation on the Note input will be activated. The Gate could be controlled from a Gate CV out-
put of a Matrix or an RPG-8 (Record+Reason), for example.
CV In
These control voltage (CV) inputs can be used for modulating various Neptune parameters from other devices. The
inputs control the following parameters: