User Manual

MATRIX PATTERN SEQUENCER
(RECORD+REASON)
885
Using Cut, Copy and Paste
By using the Cut, Copy and Paste Pattern commands on the Edit menu or device context menu, you can move or du-
plicate patterns. The following rules apply:
D Copy Pattern makes a copy of the currently selected pattern and places the copy on the clipboard.
D Cut Pattern moves the currently selected pattern to the clipboard.
This is the same as first performing Copy Pattern and then Clear Pattern.
D Paste Pattern copies the pattern on the clipboard to the selected pattern location in the selected device.
This overwrites the selected pattern with the one on the clipboard.
Transferring patterns between Record songs
If you want to copy patterns between different Record songs, you use copy and paste:
1. Open both songs.
2. Select the pattern you want to copy.
3. Select Copy Pattern from the Edit menu or the device context menu.
You can also hold [Ctrl](Win) or [Cmd](Mac) and press [C] to copy.
4. Make the other song active.
This is done by clicking in the song window or by selecting the song from the Windows menu.
5. Select the bank and pattern location to which you want to copy the pattern.
Note that any pattern already stored in that location will be overwritten!
6. Select Paste Pattern from the Edit menu or the device context menu.
You can also hold [Ctrl](Win) or [Cmd](Mac) and press [V] to copy.