User Manual

MENU AND DIALOG REFERENCE
923
Sort Selected Device Groups
This function should be used if you want to rearrange devices, channel strips or sequencer tracks according to the or-
der of the current selection. For example, if you want to rearrange the rack devices according to the current se-
quencer track order, you can select all sequencer tracks and then choose “Sort Selected Device Groups” to rearrange
the rack devices. See “About the “Sort Selected Device Groups” function” for more examples.
Auto-route Device
Auto-routing is when devices’ audio and CV/gate connections are automatically routed according to default rules.
Auto-routing is normally performed when:
• A new device is created.
• Moving, duplicating or pasting devices with [Shift] pressed.
However, if a device is already in the rack, you can “force” it to be auto-routed by selecting it and then select this
menu item.
For more information about auto-routing rules, see “Automatic routing”.
Disconnect Device
This disconnects all audio and CV/gate connections from the selected device(s).
Combine/Uncombine
D By selecting several devices in the rack and selecting “Combine”, a Combinator device will be created contain-
ing the selected devices.
D By selecting the Combinator (or one or several devices contained in a Combinator) and then selecting “Un-
combine” will remove the devices from the Combinator and into the rack.
In case the whole Combinator is selected, this will be removed and the devices it contains will be moved into the
rack.
See “The Combinator” for more details.
Copy/Paste Channel Settings (Main Mixer channel strips)
This function allows you to copy and paste the parameters of different sections of a Main Mixer channel strip and
paste into another channel strip. The available parameter groups are:
• Dynamics
• Filters and EQ
•Insert FX
This will copy the entire Effect Combi patch (with all Combinator devices included)
•FX Sends
This will only copy the FX Send parameters in the channel strip - not any FX devices or patches.
•All
This will copy all channel strip parameters, including any Insert FX devices.
Clear Insert FX
This disconnects and removes all Insert FX devices of a selected Mix Channel or Audio Track device in the rack, or
of a selected channel in the Main Mixer. See “Deleting Insert effects” for more details.