User Manual

SEQUENCER FUNCTIONS
99
Creating a parameter automation track for a non-instrument device
For non-instrument devices, such as effects devices and Mix Channel devices, you need to manually create a track if
you want to record parameter automation. You can do that either by following the description below or by following
either of the two last descriptions in “Creating/adding parameter automation lanes”.
The track creation procedure described below also applies if you have manually deleted a track for an instrument de-
vice or an Audio Track device and want to create a new track for the device:
1. Select the device by clicking on it in the rack.
A border around a device in the Rack indicates that it has been selected.
2. Select ”Create Track for (name of device)” from the Edit menu or the device context menu.
! Note that if a track already exists for the device, this menu item will not be available - a device can only have
one track.
• The new track will be automatically associated with the device and will get the same name as the device.
D Another way of creating a parameter automation track is by holding [Alt](Win) or [Option](Mac) and clicking
on a parameter on the device panel. Alternatively, select “Edit Automation” from the parameter context menu.
q If you press [Alt](Win) or [Option](Mac) when you create a non-instrument device, this will automatically create
an associated automation track for the device.
RV7000 device
RV7000 device
TheRV7000 Automation Track