Operation Manual
Table Of Contents
- Table of Contents
- The Sequencer
- Routing Audio and CV
- Routing MIDI to Reason
- Using Reason as a ReWire Slave
- MIDI and Keyboard Remote Control
- Synchronization
- Optimizing Performance
- Transport Panel
- Reason Hardware Interface
- The Mixer
- Redrum
- Subtractor Synthesizer
- Malström Synthesizer
- NN-19 Sampler
- NN-XT Sampler
- Introduction
- Panel Overview
- Loading Complete Patches and REX Files
- Using the Main Panel
- Overview of the Remote Editor panel
- About Samples and Zones
- Selections and Edit Focus
- Adjusting Parameters
- Managing Zones and Samples
- Working with Grouping
- Working with Key Ranges
- Setting Root Notes and Tuning
- Using Automap
- Layered, Crossfaded and Velocity Switched Sounds
- Using Alternate
- Sample Parameters
- Group Parameters
- Synth parameters
- Connections
- Dr. Rex Loop Player
- Matrix Pattern Sequencer
- ReBirth Input Machine
- The Effect Devices
- Menu and Dialog Reference
- About Audio on Computers
- MIDI Implementation
- Index
The Mixer
84
The Mixer Signal Flow
The basic signal flow of the Mixer 14:2 is as follows:
Note that the Solo function is true “in-place” solo, meaning that if the channel
uses Auxiliary sends routed to effect devices, the soloed output signal will also
include the Aux Return signals (from the soloed channel(s) only). Hence, you will
hear the soloed channel(s) including any Aux Send effects.
The Auxiliary Return
Section
The Auxiliary Returns provide an “extra” four stereo inputs in addition to the
Mixer’s 14 stereo channels. The main function of Return channels is to provide
inputs for connected Send effects devices. Each Aux Return channel has a level
control, and a read-only tape label that display the name of the device con-
nected to the Return channel.
The Master Fader
The Master L/R fader controls the summed output level of all channels in the
Mixer. Use this to change the relative level of all channels, to make fade-outs etc.
MuteFader Pan/EQ AUX Sends
Solo Master L/R Output
Effects DevicesAUX Returns
Input