P RO SCAN {/ ° / LC Model: 19_25Q
CAUTION: To reduce the riskof electric shock_ do not remove cover or back. No user serviceable Refer Servicing personnel. CAUTION paris inside: to qualified : Changes or modifications expressly approved responsible servfce not by the party for compliance with the FCC Rules could avoid the users' authority CAUTION to operate : The monitor dripping this equipment. shall not be exposed to or splashing.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS iNSIDETHE ENCLOSURE,DO QUALIFIED PERSONNEL HIGH VOLTAGES ARE PRESENT NOT OPEN THE CABINET, REFER SERVICING TO ONLY. WARNING: THE APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES SHALL BE PLACED ON THE APPARATUS. ,% /_, CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT.
1 READ THESE INSTRUCTIONS ON OR PINCHED 2 KEEP THESE iNSTRUCTIONS CONVENIENCE 3 HEED 4 FOLLOW ALL WARNINGS 5 DO NOT USE THIS WHERE ALL iNSTRUCTIONS 11. APPARATUS NEAR 12. a bathtub, washbowl basement, kitchen sink or laundry or near a swimming shall not be exposed filled with liquids, 6. For example, THEY EXIT FROM USE ONLY WITH WITH THE APPARATUS. shall be placed SPECIFIED CAUTION WHEN APPARATUS INJURY on the TV STAND, BY THE TRIPOD, WHEN MOVING before cleaning.
of the same type, until the surface is dry. The front of the display panel has been specially treated. Wipe the panel surface using only a cleaning gently cloth or a soft, lint-free Do not scratch or hit the surface of the panel with fingernails cloth. or other hard objects.
CAUTION AND WARNING ............................................................................. 1 IMPORTANT SAFTY INSTRUCTIONS .............................................................. 3 CLEANING AND MAINTENANCE ................................................................... 4 DEAR PROSCAN CUSTOMER ....................................................................... 4 SAFETY PRECAUTIONS ............................................................................... 7 Set up .........
Add On Ch Search ........................................................................................................................... 20 Manual Ch Set ................................................................................................................................ 20 Channel Labels ............................................................................................................................... 20 Manual Language ......................................................
_WARNING KEEP UNNEEDED SMALL SMALL CHILDREN. BE CAREFUL PARTS THESE ABOUT AND OTHER OBJECTS PACKAGING OBJECTS OUT OF THE REACH CAN BE ACCIDENTALLY MATERIALS SWALLOWED. AND PLASTIC OF ALSO, SHEETS. Set up Do not place the TV set on sloped Do not place any objects or unstable surfaces. on top of the TV set. if water spills onto the TV set or foreign short-circuiting may occur which please consult an Authorized Do not cover the ventilation could result Service holes.
When using the TV set Do not bring your hands, face or objects very hot due to the high temperature injuries can happen close to the ventilation of exhaust holes air being released if any body parts are brought too close. through Placing to the object as welt as to the TV if its ventilation Be sure to disconnect all cables the cables which, Disconnect electric shocks Clean clean humidity attached might damage before carrying out any cleaning. if this is not done.
Familiarizing (The picture Yourself of the product with the Main Hardware may vary depending on the model) ®@©@®_@ a. Select b. Main Menu Display signal input, c. Channel Up d. Channel Down e. Volume Up f. Volume Down g.
Rear panel (The picture of the product A. 12V 5A DC 50/60Hz B. Audio out Terminal. may vary depending Power Input Terminal. C. Audio for AV/S Component Left Channel D. Audio for AV/S Component Right Channel E. Y video-corn input Terminal F. Pb video-corn input Terminal. G. Pr video-com input Terminal. on the model) H. PC Audio I. Connect Input Terminal. with computer VGA signal input terminal. J. S-Video-corn Input Terminal. K. AV input Terminal L.
1. POWER Power on/off 2. INPUT Press toswitch nextinput source 3. Numeric Buttons Press tochange thechannel directly using thenumeric buttons. 4. MUTE Press totemporarily switch thesoundandpress again to resume. 5. DISPLAY Press tocheck your current mode. 6. Channel Press toselect nextorprevious active channel 7. Volume Press toincrease ordecrease thevolume. 8. ENTER Press toenter themenu andchange menu setting 9. MENU Press todisplay themainon-screen menu andretune to previous menu fromsubmenu 10.
Press toselect yourfavorite language fordigital broadcasting; youcanselect yourfavorite audio channel fromMono/Stereo/SAP when analog program 18. EPG Press toviewprogram guide forcurrent digital program. 19. FAV.+ Press toviewtheprevious favorite channel 20. CC Press toselect Caption 21.FavoritePress toviewthenextfavorite channel. 22.-/-When selecting adigital broadcast channel, press the Main channel number->"-/--"->sub channel number. Analog channels canbeviewed when thesubchannel iszero 23.
1.Push theback oftheremote control andpullforward slightly.2.1nsert two AAA1.5V batteries ensuring thecorrect polarity (+/-).3.Close thelid. Inserting the batteries Caution: Use only Alkaline Batteries.
Change both batteries atthesame time. -When notusing theremote control overatong time, remove thebatteries fromtheunit.Useonly Alkaline batteries. 1 Checking Items before Connecting Please check the list below before connecting < Check items before connecting. Check the instruction the product to other devices. > manual when connecting external devices. External products sometimes have different buttons and locations. 1 Do not connect the power unless every connection is well connected.
TURN ON LCD TV 1. Connecting to the AC input cable to switch on LCD -IV. At this time the TV will enter standby mode and indicator show red. 2. User POWER button on the remote control can turn on LCD TV from standby mode. TURN 1. OFF LCD TV Press POWER button on the remote control to enter standby mode. The indicator is red.
Press theMENU button todisplay themain menu. Use,i / t, / • / T buttons to select and adjust the available menus. NOTE: The OSD (On Screen Display) function enables you to adjust the screen status conveniently since it provides graphical presentation. 1. :Z. Using the CH • / CH v • Press CH • to increase channel • Press CH • to decrease channel Using 0-9 digital buttons You can select the channel 3, on the front panel or on the remote control. number. number.
channel number andnotendwith"ENTER", channel selection wi[[bemadeifthereisnooperation withinafewseconds You can select the input source by pressing the INPUT on the remote control or on the tfont panel. ,) NOTE: In this manual, the OSD (On Screen Display) may be different from your TV's in colors, Pressthe MENUon the front panelor on the remote control and then use A / v to selectthe PICTUREmenu. I. Use • 2. Press ENTER 3.
Brightness Press ENTER button toselect itandthenuse4 / _ to adjust the brightness of picture. Sharpness Press ENTER button to select it and then use ,4 / b. to adjust the sharpness level of picture. Color Press ENTER button to select it and then use ,4. / _.
Bass Press ENTER button to select it and then use _ / _- to increase or decrease the level of the lower-pitched sounds. Treble Press ENTER button to select it and then use ,4 / _ to increase or decrease the level of the higher-pitched sounds. Balance Press ENTER button to select it and then use _ / _. to adjust the audio output between left and right speakers. Digital Audio Output Press ENTER button to select the one of mode of the digital audio output such as PCM and RCW.
saved as below: Note: If you want you exit the Auto Ch Search during the Auto search process, press MENU twice to exit. Add On Ch Search When the channels are found, use ENTER to add it to the cannel list Manual Ch Set Press ENTER button to display a channel list that you can select channel as below: Channel Labels Allows you to name the channel that is selected. Use ,l, / • to move and use 4. / _ to change. Manual Language To select language of the OSD such as English/French and Spain.
Press MENU on the front panel or on the remote control and then use <. / v to select the FEATURE menu 1. Use _ / _- to move cursor to right area then use • 2. Press ENTER 3. When you are satisfied with your adjustment, button to directly adjust it or / • to select what you want to adjust in the FEATURE use _. / _. to enter submenu MENU to adjust press MENU to exit the main menu. Time Set Press ENTER button to directly adjust it or use _ / P.
Noise ReductionSpatial: press.4 / Noise Reduction -Speaker Noise Reduction-Temporal: Auto Contrast Enhancement: Color Temperature: :press • to select on or off. .4 / • to select on or off. press ,4 / • to select on or off. press _ press _. / • / • to select on or off. to select one of Normal/Cool and Warm. 3D Y/C: press ,4 / • to select on or off.
MAPP Press ENTER to lock or unlock one of None/G/PG/PG-13i R/NC-17 and X None - No restrictions G - General Audience. PG - Children PG-13 - Parental R- This contains under 13 should Restricted. guidance Viewers NC-17 - not classified. little or no violence, be accompanied suggested. Children no strong language, and little or no sexual dialog or situations. by an adult. under 13 should be accompanied by an adult. should be 17 or older. Viewers should be 17 or older.
Canadian English Press ENTER to lock or unlock one of E/C/C8+/G/PC/14+/18+. E - Expect No restriction. C - Children C8+ - Viewers G - General should be 8 or order. Audience. PG - Parental guidance suggested. 14+ - Restricted. Viewers should be 14 or older. 18+ - Restricted. Viewers should be 18 or older. Canadian French Press ENTER to lock or unlock one of E/G/8 ans+/13 ans+/16 ans+ and 18 ans+. E - Expect No restriction. G - For all. 8 ans+ - Restricted. Viewers should be 8 or older.
Style:press,4 / _ to select one of Automatic and Custom, when you select automatic, the other are disable and can not be adjusted. Size: press ,4 _ to select one of Normal/Large and Small. Font: press _. / _ to select one of Default and from Front 1 to Font 7. Text Color: press _ / b to select one of Red/Green/Yellow/Magenta/Cyan/Black Text Opacity: press ,4 / _ to select one of the Solidi Flashing/Transparent/Translucent Background Color: press .
V-Position Press ENTER button toselect itand then use _ / _ to adjust the vertical position of the picture. Phase Press ENTER button to select itand then use _ / b to adjust the phase of the picture. Clock Press ENTER button to select itand then use _ / _- to adjust the clock of the picture. Note: Phase- This function Clock- This function allows you to remove is to minimize any horizontal noise and clear or sharpen any vertical bars or stripes the image of characters.
Component Set Press• / v button Identifying and then use ENTER to enter the Component set menu as below Problems If there are any problems using the product, please first consult the tist below. If the tist betow does not solve the probIem, calt our Customer Service Center immediately. Setup and Connection The TV won't turn on. Check your power cable connection. • I can't view the Basic channels. Check the connection of the antenna cabte. • I want to view cable channels.
Screen • Poor picture Is the power cord unplugged? • Make sure the power cable is plugged in correctly, and then press the power of the remote control. Black picture Check if external input mode is selected Press [external input selection] and select TV • Lined and flickering picture. Try to finely adjust the channel. Are there any TV waves flowing or cordless radio transmitting stations? Avoid using cordless phones, hairdryers or electrical drills. • Disfunctioning channels.
• • • • • • • • Query theparticular broadcasting station. Alimited number ofchannels arenotfunctioning. Change thelocation ordirection oftheantenna. Trytoselect afewchannels using numbers andmemorize themusing theadd/delete button. Query thebroadcasting station. OnlyUHF(14-69) Channels areunavailable. Check iftheantenna isabletoreceive UHF. Monitor ThePCScreen continually appears anddisappears. Check theconnection between theTVandthecomputer andseeiftheconnector islocked.
