Manual

Bass
Press ENTER button to select it and then use _ / _- to increase or decrease the level of the lower-pitched sounds.
Treble
Press ENTER button to select it and then use ,4 / _ to increase or decrease the level of the higher-pitched sounds.
Balance
Press ENTER button to select it and then use _ / _. to adjust the audio output between left and right speakers.
Digital Audio Output
Press ENTER button to select the one of mode of the digital audio output such as PCM and RCW.
Auto Volume Adjust
Press ENTER button to adjust the volume automatically.(TV and HDMI input only)
Press MENU on the front panel or on the remote control and then use A / v to select the SETUP menu.
1. Use _. / _. to move cursor to right area then use A / v to select what you want to adjust in the SETUP MENU.
2. Press ENTER button to directly adjust it or use .4. / _ to enter submenu to adjust
3. When you are satisfied with your adjustment, press MENU to exit the main menu.
Tuning Band
Press ENTER button to select Air, Cable, Cable HRC, Cable IRC or Cable Auto.
DTV-Signal
In DTV mode, you can tune manually and adjust the angle. Orientation of the antenna etc.
Auto Ch Search
Press ,L / • to move the cursor to the item to be selected (item selected highlighted in yellow). Press ENTER key to enter
your selection and scan. After the scan is finished, the following menu will display. The channels found the automatically
]9