PRO CAN INSTRUCTION MANUAL Model: 26LB30QD 32LB30QD
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance with the FCC Rules could avoid the users' authority CAUTION: to operate this equipment. The monitor shall not be exposed to dripping or splashing. No objects filled with liquids, such as vases, shall be placed on the Monitor CAUTION: Do Not Place This TV on an Unstable cart, stand, or table. The TV may fail, causing serious injury to a child or adult, and serious damage to the TV.
WARNING: TO REDUCE THE RISK OF FIRE OF ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS INSIDE THE ENCLOSURE.DO QUALIFIED PERSONNEL WARNING: THE APPARATUS SPLASHING HIGH VOLTAGES ARE PRESENT NOT OPEN THE CABINET. REFER SERVICING TO ONLY. SHALL NOT BE EXPOSED TO DRIPPING OR AND THAT NO OBJECTS FILLED WITH LIQUIDS, _ _ ;_ SUCH AS VASES SHALL BE PLACED ON THE APPARATUS. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT.
1 READ THESE INSTRUCTIONS CONVENIENCE 2 KEEP THESE INSTRUCTIONS WHERE THEY EXIT FROM THE APPARATUS. 3 HEED ALL WARNINGS 4 FOLLOW ALL INSTRUCTIONS 5 DO NOT USE THIS APPARATUS 11. AND THE POINT ONLY USE ATTACHMENTSIACCESSORIES SPECIFIED BY THE MANUFACTURER. NEAR 12. WATER 6. RECEPTACLES, USE ONLY WITH CART, STAND, TRIPOD, BRACKET, TABLE SPECIFIED BY THE MANUFACTURER, Do not use this TV near water. For exampte, do not use near WITH THE APPARATUS.
The front of the display panel has been of the same type, until the surface is dry. specially treated. Wipe the panel surface gently using only a cleaning cloth or a soft, tint-free Do not scratch or hit the surface of the panel with cloth. fingernails or other hard objects.
CAUTION AND WARNING ............................................................................. IMPORTANT SAFTY CLEANING DEAR PROSCAN SAFETY INSTRUCTIONS MAINTENANCE AND CUSTOMER PRECAUTIONS INSTALLATION Preparation ............................................................. ................................................................... ....................................................................... ...........................................................................
Safety Precautions ,_WARNING KEEP UNNEEDED SMALL PARTS AND OTHER OBJECTS OUT OF THE REACH OF SMALL CHILDREN. THESE OBJECTS CAN BE ACCIDENTALLY BE CAREFUL ABOUT PACKAGING SWALLOWED. ALSO, MATERIALS AND PLASTIC SHEETS. Set up Do not pIace the TV set on stoped or unstable surfaces.
Safety Precautions When using the TV set Do not bring your hands, face or objects close to the ventilation very hot due to the high temperature holes of the TV set Top of the TV set is usuaIIy of exhaust air being reIeased through the Ventilation holes Burns or personal injuries can happen if any body parts are brought too close.
Preparation for using your new TV Familiarizing Yourself (The picture of the product with the Main Hardware may vary depending on the model) TV buttons: a Select signal input. (It changes to "ENTER" function when main menu displays ) b Main Menu display and menu selection c. Channel down d Channel up e Volume down f Volume up g ON/OFF button DVD buttons: A. NEXT button in DVD mode B. PREV button in DVD mode C. ZOOM: Zoom the size of the screen D. EJECT button E.
Preparation for using your new TV Rear panel (The picture of' the product may vary depending on the model) ® HDMI Input S-Video Input Input1 : J - Video : M Input2: K - Audio : D, D1 Component Input 1 Video : E, F, G Audio : C, C1 Component Input 2 VGA input - Video : I - Audio : H (3.
Preparation for using your new TV 1 Checking Items before Connecting Please check the list below before connecting the product to other devices < Check items before connecting. > Check the instruction manual when connecting external devices External products sometimes have different buttons and locations 1 Do not connect the power unless every connection is well connected. The product may be damaged if turned on while still in the process of being connected.
Using the remote control 1. POWER: Power on/off 2. SLEEP:Press to select a preset time interval to automatically shut the TV 3. ASPECT:Press to adjust the screen size. 4. DISPLAY:Press to Check your current mode. 5. INPUT:Press to Display a menu of all available input sources, Also used to confirm your choice in the on-screen menu. 6. FAV:Add/detete the current channel to your favorite channel 7. MTS:tt displays "Audiot/Audio2" 8. FAV.+:Press to view the next favorite channel. 9.
Using the remote control 27 EJECT: Auto adjustion in PC mode Eject the DVD disc out of the DVD slot in DVD mode 28 STEP:Press the button to pause,then press the STEP button to playback frame by frame.you can return to normal playback at any time by pressing the STEP button. 29 STOP: Press the STOP button once to stop playback. Press the PLAY/PAUSE button to resume playback. Press the STOP button twice to stop playback completely.
Using the remote control < Inserting the batteries into the remote control >1 .Push the back of the remote control and )utl forward stightty.2.1nsert two AAA 15V batteries ensuring the correct polarity (+/-).3.Close the lid. inserting the batteries Caution: Use only Alkaline Batteries. • If the remote control is not working, see the checkpoints below.
Basic operation TURN ON LCD TV 1. Connecting to the AC input cable to switch on LCD TV. At this time the TV will enter standby mode and indicator show red. 2. User POWER button or @ TURN button on the remote control can turn on LCD TV from standby mode. OFF LCD TV 1. Press POWER button or @ 2. Wait 5 second after switch off LCD TV then you can turn on LCD TV again. 1. 2. Using the CH A / CH • button on the remote control to enter standby mode. The indicator is red.
Basic operation You can select the input source by pressing the INPUT on the remote control or on the front panel. INPUT Menu 1. Press VOL+/- to adjust the volume. 2. If you want to switch the sound OFF, press the MUTE, will turn on CC display at the same time. 3.
Setup menu operation Press the MENU button to display the main menu. Use i / _ / A / _/ buttons to select and adjust the available menus. t NOTE: The OSD (On Screen Display) function since it provides enables you to adjust the screen status conveniently graphical presentation.
Setup menu operation NOTE: If you use your LCD TV for the first time, you should select the language for displaying which will be used menus and indications • Press MENU to display the main menu. • Press • / • • Use,q./ _- and • repeatedty to select the SETUP MENU. / T to select MENU LANGUAGE. Press ENTER button to select your desired language. NOTE: In this manual, the OSD (On Screen Display) may be different from your TV's in colors.
Setup menu operation Contrast Press ENTER button to select it and then use _ / _- to adjust the contrast of picture. Brightness Press ENTER button to select it and then use _ / _- to adjust the brightness of picture. Sharpness Press ENTER button to select it and then use _ / p, to adjust the sharpness level of picture.
Setup menu operation Audio Language Press ENTER to one of the audio language such as English/French and Spain, but the condition is that the program system has included the language code. Bass Press ENTER button to seiect it and then use ,_ / J,- to increase or decrease the level of the lower-pitched sounds. Treble Press ENTER button to seiect it and then use _ / i,, toincreaseordecreasethelevelofthe higher-pitchedsounds.
Setup menu operation In DTV mode, you can tune manually and adjust the angle. Orientation of the antenna etc. Auto Ch Search Press A / _ to move the cursor to the item to be seIected (item seIected highlighted in yellow). Press ENTER key to enter your selection and scan. After the scan is finished, the following menu wiII disptay. The channels found the automatically saved as below: Note: If you want you exit the Auto Oh Search during the Auto search process, press MENU twice to exit.
Setup menu operation Reset Press ENTER to return to the factory setting. Press MENU on the front panel or on the remote control and then use < 1. Use A / _/ to select what you want to adjust in the FEATURE menu. 2. Press ENTER button to select it and then use q 3. When you are satisfied with your adjustment, / _ to select the FEATURE menu / _ to adjust press MENU to exit the main menu.
Setup menu operation Noise Reduction- Spatial: press 4. / _ Noise Reduction -Speaker :press • Noise Reduction-Temporal: to select on or off. / _- to select on or off. press *_ / _- to select on or off. Auto Contrast Enhancement: press 4 CoIor Temperature: press • / _- to seIect one of Normal/Cool 3D Y/C: press 4 Password / _- to select on or off. and Warm. / _ to select on or off.
Setup menu operation M PAA Press ENTER to lock or unlock one of None/G/PG/PG-13/R/NC-17 and X None - No restrictions G - General Audience. This contains little or no violence, no strong language, and little or no sexual diaIog or situations. PG - Children under 13 should be accompanied by an aduIt. PG-13 - Parental guidance suggested. Children under 13 should be accompanied by an adult. R - Restricted. Viewers shouId be 17 or older. NC-17 - not classified. Viewers shouId be 17 or older.
Setup menu operation Canadian English Press ENTER to lock or uniock one of E/C/C8+/G/PG/14+/18+. E - Expect No restriction. C - Children C8+ - Viewers should be 8 or order. G - General Audience. PG - Parental guidance suggested. 14+ - Restricted. Viewers should be 14 or older. 18+ - Restricted. Viewers should be 18 or older. Canadian French Press ENTER to lock or unlock one of E/G/8 ans+/13 ans+/16 ans+ and 18 ans+. E - Expect No restriction. G - For all. 8 ans+ - Restricted.
Setup menu operation Style:press *_ / _ toselectoneofAutomaticand Custom, whenyou select automatic, the other are disabIe and can notbe adjusted. Size: press q / _. to select one of Normal/Large Font: press _ / _ and Small. to select one of Default and from Front 1 to Font 7. Text Color: press 4. / _ to select one of Red/Green/Yellow/Magenta/Cyan/Black Text Opacity: press 4 / _ and White.
Setup menu operation V-Pos Press ENTER button to select it and then use • / _- to adjust the vertica( position of the picture. Phase Press ENTER button to select it and then use • / _- to adjust the phase of the picture. Clock Press ENTER button to select it and then use • / _- to adjust the clock of the picture. Note: Phase- This function allows you to remove any horizontal noise and clear or sharpen the image of characters.
Setup menu operation Press MENU on the front panel or on the remote control and then use 4 / _ to select the Feature menu in HDMI mode. Time Set Press & / !r button and then use ENTER the time set menu that allows you to set the time the TV will display. Sleep timer Press ENTER button to select it and then use q / ,, to adjust the amount of time before your TV turn off automatically press the ENTER that can select the 15min/30min/45min/60min/90min/120min/180min/240min and and OFF.
Setup menu operation Title: DVD Video discs are usually divided into several numbered sections called titles. Chapter: A title comprises smaller numbered sections called chapters. • Playing the DVD Player !. Press the 'INPUT' button to select 'DVD' mode, if no disc is inserted yet, the display shows 'No Disc'. 2.Insert a DVD with the printed side facing towards the rear of the TV/DVD CORRECT backside INCOI_._EC[ of W 3.
Setup menu operation 12cm DVD Video Discs, o 12cm Compact DiscAudio Discs. 12cm Still High Resolution WARNING! DO NOT INSERT OR PLAY 8CM DISCS, THEY WILL GET STUCK. • Basic Control Function Play/Pause 1.Press the I_ button to play/pause the DVD. The screen will freeze its current picture when paused. 2. For resume play, press the I_ button. Stop • After pressing the • button to stop playback.
Setup menu operation Some DVDs are recorded with multiple audio channels. These can be used for different languages or for commentaries. • Repeatedly press the AUDIO button to select the desired audio channel. Repeat Chapter/Title • To repeat playback of a chapter, press the REPEAT button while the chapter is playing. 'Chapter' will be displayed. • To repeat playback of the title, press the REPEAT button twice. 'Title' will be displayed.
Setup menu operation TV Shape: set the Picture Shape: OSD Lang.: Set the language of OSD menu. Default setting is English. Last Memory: set it on to memorize the last stop point. During playing the DVD, you change to other mode. When you come back to DVD mode, it can play automatically Audio from the last stop point. Setup Page a. Press SETUP button on remote control during playing DVD, Press "1_ 41- unti! it will show following menu: (When the DVD menu displayed ,the DVD system will auto pause.
Setup menu operation b. Press "_'iA"to choose the items, then enter the desired already when the desired item becomes item with ENTER button. It has been set red. Note: Press Left button to get back the previous menu. c. Press SETUP to exit the menu. d. The items of the menu as below: TV Type: Choose the TV system that is compatible Audio: with the color system of the TV. Choose the default language you would prefer to for DVD titles.
Appendix Identifying Problems If there are any problems using the product, please first consult the list below. If the list beIow does not solve the problem, call our Customer Service Center immediately. Setup and Connection The TV won't turn on Check your power cable connection. • t can't view the Basic channels. Check the connection of the antenna cable • t want to view cable channels. Register with your local cable company then connect their receiver to your TV.
Appendix • Disfunctioning channels. Check if the channel has been selected correctly. Try changing the position of the antenna. • Picture with white and black dots. Check if your antenna is damaged or any connections are broken. Replace your antenna • Only certain channels are in black and white Check if the program is being broadcast in black and white Try to check the hue or contrast. • The Sub-Screen is black. Check the power of the external device connected to the TV.
Appendix • The PC Screen continually appears and disappears. Check the connection between the TV and the computer and see if the connector is Iocked. • A 'There is no signal "message appears. This happens if the signal from the video card is exceeded for the maximum resolution or frequency of the TV. Try to set the maximum resolution or frequency for the TV.
Appendix Wall Mounting Wall mounting(unit: mm) Screw Diameter(unit: 405X200 Remark: The specification NOTE: Wall mount bracket vary depending Specification ram) Screw Length(unit: M4 of screw mm) 12 is just used on the back unit. is not included with TV and mounting on brand and size of bracket. that came with wall mount for specific Customer information of wall mount bracket should consult bracket on how to mount bracket mounting to wall may instructions to wall.
Appendix UNIVERSAL REMOTE CONTROL For Universal Remote and refer to your Universal operate Proscan CODE LIST Control brands listed below, please use accompanying Remote Control User Manual for basic instruction Proscan for changing codes TV code to model.
Appendix TV SPECIFICATION Model Diagonal display size Television system American Audio multiplex BTSC system Channel coverage PC mode 26LB30QD 32LB30QD 26 inches 32 inches TV standard ATSC/NTSC VHF: 2~13 UHF: 14~69 CATV:I~125 mode ~6 ~1 Digital Terrestrial Broadcast (8VSB): 2 9 Digital cable (641256 QAM): t 35 640x480/60Hz,800x600/60Hz,1024x YPbPr/YCbCr system, Built in DVD Combo 768/60Hz 4801/60Hz,480P/60Hz,720P/60Hz,10801/60Hz HDMI Mode 4801/60Hz,480PI60Hz,720PI60Hz,IOSOII60Hz Resolut