PRO iNSTRU C A N° MANUAL Mode!'.
CAUTION: To reduce the risk of electric shock, do not remove cover or back. No user- serviceable parts inside. Refer ServTcing to qualified service personnel. CAUTION: Changes or modifications expressly approved responsible not by the party for compliance with the FCC Rules could avoid the users' authority CAUTION: The monitor dripping filled with be placed CAUTION: to operate this equipment. shall not be exposed or splashing.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS INSIDE THE ENCLOSURE.DO QUALIFIED PERSONNEL WARNING: THE APPARATUS SPLASHING HIGH VOLTAGES ARE PRESENT NOT OPEN THE CABINET. REFER SERVICING TO ONLY. SHALL NOT BE EXPOSED TO DRIPPING OR AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES SHALL BE PLACED ON THE APPARATUS. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT.
1 READ THESE INSTRUCTIONS 10. 2 KEEP THESE INSTRUCTIONS 3 HEED ALL WARNINGS CONVENIENCE 4 FOLLOW ALL INSTRUCTIONS WHERE THEY EXIT FROM THE APPARATUS. 5 DO NOT USE THIS APPARATUS ON OR PINCHED NEAR WATER 11. 6. kitchen sink or laundry tub, in a wet PARTICULARLY RECEPTACLES, AT PLUGS, AND THE POINT ONLY USE ATTACHMENTS/ACCESSORIES SPECIFIED BY THE MANUFACTURER. Do not use this TV near water. For example, do not use near a bathtub, washbowl, PROTECT THE POWER CORD FROM BEING WALKED 12.
of the same type, until the surface The front of the display panel has been specially treated. Wipe the panel surface using only a cleaning gently Do not scratch or hit the surface cloth or a soft, lint-free fingernails cloth. If the surface is particularly cloth in a weak detergent with volatile sprays, solvents Welcome substances Furthermore, avoid such as insect dirty, soak a soft, lint-free solution and thinner; otherwise, the quality and then remove liquid.
SafetyPrecautions CAUTION AND WARNING ........................................................................... IMPORTANT SAFETY CLEANING DEAR AND MAINTENANCE PROSCAN SAFETY INSTRUCTIONS CUSTOMER PRECAUTIONS ........................................................... ................................................................. ..................................................................... .............................................................................
SafetyPrecautions ,_WARNING KEEP UNNEEDED SMALL PARTS AND OTHER OBJECTS OUT OF THE REACH OF SMALL CHILDREN. THESE OBJECTS CAN BE ACCIDENTALLY BE CAREFUL ABOUT PACKAGING SWALLOWED. ALSO, MATERIALS AND PLASTIC SHEETS. Set up Do not place the TV set on sloped or unstable surfaces. Do not place any objects on top of the TV set. If water spills onto the TV set or foreign objects get inside it, short-circuiting may occur which could result in fire or electric shock.
SafetyPrecautions When using the TV set Do not bring your hands, face or objects close to the ventilation holes of the TV set. Top of the TV set is usually very hot due to the high temperature of exhaust air being released through the Ventilation holes. Burns or personal injuries can happen if any body parts are brought too close. Placing any object near the top of the TV could also result in heat damage to the object as well as to the TV if its ventilation Be sure to disconnect holes are blocked.
Preparationfor usingyour newTV Familiarizing Yourself with the Main Hardware (The picture of the product may vary depending a. Select signal input. (It changes to "ENTER" b. Main Menu display and menu selection c. Channel up d. Channel down e. Volume up f. Volume down g.
Preparationfor usingyour newTV Rear panel (The picture of' the product may w_ry depending on J _ HDMI Input Input1: J Component VGA Input 1 Video: E1, F1,G1 Audio: B, B1 Component E, Audio: C,C1 F, Composite Input Video: L Audio: D, D1 Input Video: M Audio: D, D1 Input Video: I Audio: H(3.
Preparationfor usingyour newTV 1 Checking Items before Connecting Please check the list below before connecting < Check > items before Check the instruction buttons 1 connecting. manual when connecting the product external to other devices. devices. External products sometimes have different and locations. Do not connect the power unless every connection is well connected.
Usingthe remotecontrol 1. POWER: 2. MUTE: 3. SLEEP: Power on/off Press to temporarily Press automatically to select switch the sound off. a preset time interval shut the TV 4. ASPECT: Press to adjust the screen size. 5. DISPLAY: Press to Check your current 6. INPUT: 7. Press to Display a menu Also used to confirm the on-screen menu. Press to select your mode. of all available input sources, MTS: to your choice in favorite language in digital broadcasting 8.
Usingthe remotecontrol 17. PICTURE: Press to change to a preset picture mode. 18. SOUND: 19. DTV: Press to change Press to change to a preset sound mode. between Analog TV and Digital TV 20. EPG: One of signal channel EPG or Multi channel EPG 21. FREEZE: Press to freeze the current picture 22. CC: Press to select Caption 23. Volume: 24. Channel: Press to increase Press to select or decrease the volume.
Usingthe remotecontrol < Inserting the batteries into the remote 1. Push the back of the remote 2. Pull forward 3. Insert two AA 1.5V batteries. 4. Ensuring 5. Close the lid. control > control slightly. the correct polarity (+/-). Inserting Caution: Use only Alkaline Batteries.
Setupmenuoperation TURN ON LCD TV 1. Connecting to the AC input cable to switch on LCD TV. At this time the TV will enter standby mode and indicator show red. 2. User POWER button or button on the remote control can turn on LCD TV from standby mode. TURN OFF LCD TV 1. 2. 1. Press POWER 2. Wait 5 second button or button on the remote control to enter standby mode. The indicator is red. after switch off LCD TV then you can turn on LCD TV again.
Setupmenuoperation You can select the input source by pressing the INPUT on the remote INPUT 1. Press VOL+/- to adjust the volume. 2. If you want to switch the sound OFF, press the MUTE. 3. You can cancel this function by pressing MUTE or VOL+/- control or on the front panel.
Setupmenuoperation Press the MENU button to display the main menu. Use _ / b. / A / v buttons to select and adjust the available menus. T 1 NOTE: The OSD (On Screen Display) function until it provides graphical enables you to adjust the screen status conveniently presentation. When the cursor stays on a main menu function(Picture, ENTER or _ button to activate it.
Setupmenuoperation NOTE: If you use your LCD TV for the first time, you should select the language for displaying which will be used menus and indications • Press MENU to display the main menu. • Press • • Use ,L / v and ENTER to select MENU LANGUAGE. / v repeatedly to select the SETUP MENU. Press ENTER button to select your desired language. NOTE: In this manual, the OSD (On Screen Display) may be different from your TV's in colors.
Setupmenuoperation Contrast Press ENTER button to select it and then use ,t / _ to adjust the contrast of picture. Brightness Press ENTER button to select it and then use ,t / _ to adjust the brightness of picture. Sharpness Press ENTER button to select it and then use ,t / _ to adjust the sharpness level of picture.
Setupmenuoperation Audio Language Press ENTER to one of the audio language such as English/French and Spain, but the condition is that the program system has included the language code. Bass Press ENTER button to select it and then use ,4. / _. to increase or decrease the level of the lower-pitched sounds. Treble Press ENTER button to select it and then use ,4. / _. to increase or decrease the level of the higher-pitched sounds. Balance Press ENTER button to select it and then use ,q. / _.
Setupmenuoperation Auto Ch Search Press A / v to move the cursor to the item to be selected (item selected highlighted in yellow). Press ENTER key to enter your selection and scan. After the scan is finished, the following menu wilt display. The channels found the automatically saved as below: Note: If you want you exit the Auto Ch Search during the Auto search process, press MENU twice to exit.
Setupmenuoperation Reset Press ENTER to return to the factory setting. Press MENU on the front panel or on the remote control and then use <. / _ to select the FEATURE menu 1. Use A / v to select what you want to adjust in the FEATURE menu. 2. Press ENTER button to select it and then use ,t. / _ to adjust 3. When you are satisfied with your adjustment, press MENU to exit the main menu. Time Set Press ENTER button to select it and then use <.
Setupmenuoperation Advance Video Menu Press ENTER to enter the advance video menu as below Noise Reduction- Spatial: press _ / b, to select on or off. Noise Reduction -Speaker :press ,4 / _, to select on or off. Noise Reduction-Temporal: Color Temperature: press _ press ,d / b, to select on or off. / _- to select one of Normal/Cool and Warm. 3D Y/C: press _ / b. to select on or off. Blue screen: Select to turn on blue screen display when there is no signal.
Setupmenuoperation US Ratings Press ENTER to enter the Parental Control Menu as below M PAA Press ENTER to lock or unlock one of None/G/PG/PG-13/R/NC-17 and X None - No restrictions G - General Audience. This contains little or no violence, no strong language, and little or no sexual dialog or situations. PG - Children under 13 should be accompanied by an adult. PG-13 - Parental guidance suggested. Children under 13 should be accompanied by an adult. R - Restricted. Viewers should be 17 or older.
Setupmenuoperation Advanced Parental Lock When select the ON for Advance Rating, the Advanced Parental Lock will display. Canadian English Press ENTER to lock or unlock one of E/C/C8+/G/PG/14+/18+. E - Expect No restriction. C - Children C8+ - Viewers should be 8 or order. G - General Audience. PG - Parental guidance suggested. 14+ - Restricted. Viewers should be 14 or older. 18+ - Restricted. Viewers should be 18 or older.
Setupmenuoperation Digital Closed Captions This menu allows you to set the closed caption, and press ENTER to enter Closed Caption Options menu as below: Style: press < v to select one of Automatic and Custom, when you select automatic, the other are disable and can not be adjusted. Size: press < _- to select one of Normal/Large and Small. Font: press < _- to select one of Default and from Front 1 to Font 7. Text Color: press < / b.
Setupmenuoperation VGA Set Press A / v button and then press ENTER to enter the VGA set menu as below H-Position Press ENTER button to select it and then use ,q / _ to adjust the horizontal position of the picture. V-Position Press ENTER button to select it and then use ,q / _ to adjust the vertical position of the picture. Phase Press ENTER button to select it and then use ,q / _ to adjust the phase of the picture.
Setupmenuoperation Press MENU on the front panel or on the remote control and then use ,i / _ to select the Feature menu in Ypbpr mode. 1. Use A / T to select what you want to adjust in the FEATURE menu. 2. Press ENTER button to select and then use 4 3. When you are satisfied with your adjustment, Component ! _ to adjust press MENU to exit the main menu.
Setupmenuoperation Press MENU on the front panel or on the remote control and then use ,q. / _. to select the Feature menu in HDMI mode. Time Set Press A / T button and then use ENTER the time set menu that allows you to set the time the TV will display. Sleep timer Press ENTER button to select it and then use ,4 ! _ to adjust the amount of time before your TV turn off automatically press the ENTER that can select the 15min!30min! 45min!60min! 90min!120min/180min!240min and and OFF.
Appendix Identifying Problems If there are any problems Customer Setup Service using the product, call our Center immediately. and Connection The TV won't turn on. Check your power cable connection. • I can't view the Basic channels. • I want to view cable channels. • I want to view satellite • Digital broadcasting connected The Remote Change Check the connection of the antenna cable. Register with your local cable company channels. Setup your Satellite is not functioning.
Appendix Are there any TV waves flowing or cordless radio transmitting stations? Avoid using cordless phones, hairdryers or electrical drills. • Disfunctioning Check if the channel Try changing • channels. has been selected correctly. the position of the antenna. Picture with white and black dots. Check if your antenna is damaged or any connections are broken. Replace your antenna.
Appendix Monitor • The PC Screen continually Check the connection • appears between the TV and the computer A "There is no signal "message This happens maximum and disappears. or frequency The screen looks like there is water flowing Check • the connector The screen is unclear Change • Unstable and flickering or frequency of the TV. Try to set the is deactivated when any key is pressed or the mouse is moved) on it. to the TV.
Appendix Wall Mounting Unit Specification Unit Dimension(unit: mm) Screw Diameter 405X200 Remark: The specification NOTE: Screw Length(unit: M4 12 of screw is just used on the back cabinet. Wall mount bracket is not included with TV and mounting vary depending instructions mm) on brand and size of bracket, Customer that came with wall mount for specific of wall mount bracket to wall may should consult bracket mounting information on how to mount bracket to wall.
Appendix SAFETY WARNINGS: 1. Do not set up the wall mount by yourself. Please contact qualified professionals 2. The TV should not be mounted direction. Otherwise 3. for installtion. on walls or surfaces which have an angle more than 10 degrees with vertical the TV set may fall. The walls for mounting must have enough strength to hold the whole weight of TV set. For example, concrete wall and brickwork are eligible. Do not place the mount on soft walls such as earth walls and plasterboard. 4.
Appendix TV SPECIFICATION Model Diagonal 37LB30Q display size Television 37 inches system American TV standard Audio multiplex system BTSC system VHF: 2~13 UHF: 14~69 CATV: 1~125 ~6 ~1 Digital Terrestrial Broadcast Channel coverage (8VSB): 2 9 Digital cable (641256 QAM): 1 35 PC mode 640x480/60Hz, YPbPr/YCbCr ATSC/NTSC mode 800x600/60Hz, 1024x768/60Hz 480i/60Hz, 480p/60Hz, 720p/60Hz, 1080i/60Hz HDMI Mode 480i/60Hz, 480p/60Hz, 720p/60Hz, 1080i/60Hz Resolution 1366x768 Power source AC