PRO CAN TION MANUAL Model: 37LB30QD
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance with the FCC Rules could avoid the users' authority CAUTION: to operate this equipment. The monitor shall not be exposed to dripping or splashing. No objects filled with liquids, such as vases, shall be placed on the Monitor CAUTION: Do Not Place This TV on an Unstable cart, stand, or table. The TV may fail, causing serious injury to a child or adult, and serious damage to the TV.
WARNING: TO REDUCE THE RISK OF FIRE OF ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS INSIDE THE ENCLOSURE.DO QUALIFIED PERSONNEL WARNING: THE APPARATUS SPLASHING HIGH VOLTAGES ARE PRESENT NOT OPEN THE CABINET. REFER SERVICING TO ONLY. SHALL NOT BE EXPOSED TO DRIPPING OR AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES SHALL BE PLACED ON THE APPARATUS. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT.
1 READ THESE INSTRUCTIONS ON OR PINCHED PARTICULARLY 2 KEEP THESE INSTRUCTIONS CONVENIENCE 3 HEED ALL WARNINGS WHERE THEY EXIT FROM THE APPARATUS. 4 FOLLOW ALL INSTRUCTIONS 5 DO NOT USE THIS APPARATUS 11. NEAR AND THE POINT ONLY USE ATTACHMENTS/ACCESSORIES SPECIFIED BY THE MANUFACTURER. WATER 6, RECEPTACLES, AT PLUGS, 12. USE ONLY WITH CART, STAND, Do not use this TV near water.
The front of the display panel has been of the same type, until the surface is dry. specially treated. Wipe the panel surface gently using only a cleaning cloth or a soft, tint-free Do not scratch or hit the surface of the panel with cloth. fingernails or other hard objects.
CAUTION AND WARNING ............................................................................. IMPORTANT SAFTY CLEANING DEAR PROSCAN SAFETY INSTRUCTIONS MAINTENANCE AND CUSTOMER PRECAUTIONS INSTALLATION Preparation ............................................................. ................................................................... ....................................................................... ...........................................................................
Safety Precautions ,_WARNING KEEP UNNEEDED SMALL PARTS AND OTHER OBJECTS OUT OF THE REACH OF SMALL CHILDREN. THESE OBJECTS CAN BE ACCIDENTALLY BE CAREFUL ABOUT PACKAGING SWALLOWED. ALSO, MATERIALS AND PLASTIC SHEETS. Set up Do not pIace the TV set on stoped or unstable surfaces.
Safety Precautions When using the TV set Do not bring your hands, face or objects close to the ventilation very hot due to the high temperature holes of the TV set Top of the TV set is usuaIIy of exhaust air being reIeased through the Ventilation holes Burns or personal injuries can happen if any body parts are brought too close.
Preparation for using your new TV Familiarizing Yourself (The picture of the product with the Main Hardware may vary depending on the model) TV buttons: a Volume up b Volume down c. Channel up d Channel down e Main Menu display and menu selection f Select signal source g POWER ON/OFF button (it changes to "ENTER" function when main menu displays ) DVD buttons: A. STEP button B. EJECT button C. PREV button in DVD mode D. NEXT button in DVD mode E.
Preparation for using your new TV Rear panel (The picture of' the HDMI Input product may vaz'y depending on model) S-Video Input Input1 : J - Video : M Input2: K - Audio: Component the Input 1 D, D1 VGA input Video : E, F, G - Video : I Audio : C, CI - Audio : H (3.
Preparation for using your new TV Audio 1 Checking : D, DI Items before Connecting Ptease check the list below before connecting the product to other devices < Check items before connecting. > Check the instruction manual when connecting external devices External products sometimes have different buttons and locations 1 Do not connect the power unless every connection is well connected. The product may be damaged if turned on while still in the process of being connected.
Using the remote control 1. POWER: Power on/off 2. SLEEP:Press to select a preset time interval to automatically shut the TV 3. ASPECT:Press to adjust the screen size. 4. DISPLAY:Press to Check your current mode. 5. INPUT:Press to Display a menu of all available input sources, Also used to confirm your choice in the on-screen menu. 6. FAV:Add/detete the current channel to your favorite channel 7. MTS:tt dispIays"Audiot/Audio2" 8. FAV.+:Press to view the next favorite channel. 9.
Using the remote control 27 EJECT: Auto adjustion in PC mode. Eject the DVD disc out of the DVD slot in DVD mode 28 STEP:Press the button to pause,then press the STEP button to playback frame by frame.you can return to normal playback at any time by pressing the STEP button. 29 STOP: Press the STOP button once to stop playback. Press the PLAY/PAUSE button to resume playback. Press the STOP button twice to stop playback completely.
Using the remote control < Inserting the batteries into the remote control >1 .Push the back of the remote control and )utl forward stightty.2.1nsert two AAA 15V batteries ensuring the correct polarity (+/-).3.Close the lid. inserting the batteries Caution: Use only Alkaline Batteries. • If the remote control is not working, see the checkpoints below.
Basic operation TURN ON LCD TV 1. Connecting to the AC input cable to switch on LCD TV. At this time the TV will enter standby mode and indicator show red. 2. User POWER button or @ TURN button on the remote control can turn on LCD TV from standby mode. OFF LCD TV 1. Press POWER button or @ 2. Wait 5 second after switch off LCD TV then you can turn on LCD TV again. 1. 2. Using the CH A / CH • button on the remote control to enter standby mode. The indicator is red.
Basic operation You can select the input source by pressing the INPUT on the remote control or on the front panel. INPUT Menu 1. Press VOL+/- to adjust the volume. 2. If you want to switch the sound OFF, press the MUTE, will turn on CC display at the same time. 3.
Setup menu operation Press the MENU button to display the main menu. Use i / _ / A / _/ buttons to select and adjust the available menus. t NOTE: The OSD (On Screen Display) function since it provides enables you to adjust the screen status conveniently graphical presentation.
Setup menu operation NOTE: If you use your LCD TV for the first time, you should select the language for displaying which will be used menus and indications • Press MENU to display the main menu. • Press • / • • Use,q./ _- and • repeatedty to select the SETUP MENU. / T to select MENU LANGUAGE. Press ENTER button to select your desired language. NOTE: In this manual, the OSD (On Screen Display) may be different from your TV's in colors.
Setup menu operation Contrast Press ENTER button to select it and then use _ / _- to adjust the contrast of picture. Brightness Press ENTER button to select it and then use _ / _- to adjust the brightness of picture. Sharpness Press ENTER button to select it and then use _ / p, to adjust the sharpness level of picture.
Setup menu operation Audio Language Press ENTER to one of the audio language such as English/French and Spain, but the condition is that the program system has included the language code. Bass Press ENTER button to seiect it and then use ,_ / J,- to increase or decrease the level of the lower-pitched sounds. Treble Press ENTER button to seiect it and then use _ / i,, toincreaseordecreasethelevelofthe higher-pitchedsounds.
Setup menu operation In DTV mode, you can tune manually and adjust the angle. Orientation of the antenna etc. Auto Ch Search Press A / _ to move the cursor to the item to be seIected (item seIected highlighted in yellow). Press ENTER key to enter your selection and scan. After the scan is finished, the following menu wiII disptay. The channels found the automatically saved as below: Note: If you want you exit the Auto Oh Search during the Auto search process, press MENU twice to exit.
Setup menu operation Reset Press ENTER to return to the factory setting. Press MENU on the front panel or on the remote control and then use < 1. Use A / _/ to select what you want to adjust in the FEATURE menu. 2. Press ENTER button to select it and then use q 3. When you are satisfied with your adjustment, / _ to select the FEATURE menu / _ to adjust press MENU to exit the main menu.
Setup menu operation Noise Reduction- Spatial: press 4. / _ Noise Reduction -Speaker :press • Noise Reduction-Temporal: to select on or off. / _- to select on or off. press *_ / _- to select on or off. Auto Contrast Enhancement: press 4 CoIor Temperature: press • / _- to seIect one of Normal/Cool 3D Y/C: press 4 Password / _- to select on or off. and Warm. / _ to select on or off.
Setup menu operation M PAA Press ENTER to lock or unlock one of None/G/PG/PG-13/R/NC-17 and X None - No restrictions G - General Audience. This contains little or no violence, no strong language, and little or no sexual diaIog or situations. PG - Children under 13 should be accompanied by an aduIt. PG-13 - Parental guidance suggested. Children under 13 should be accompanied by an adult. R - Restricted. Viewers shouId be 17 or older. NC-17 - not classified. Viewers shouId be 17 or older.
Setup menu operation Canadian English Press ENTER to lock or uniock one of E/C/C8+/G/PG/14+/18+. E - Expect No restriction. C - Children C8+ - Viewers should be 8 or order. G - General Audience. PG - Parental guidance suggested. 14+ - Restricted. Viewers should be 14 or older. 18+ - Restricted. Viewers should be 18 or older. Canadian French Press ENTER to lock or unlock one of E/G/8 ans+/13 ans+/16 ans+ and 18 ans+. E - Expect No restriction. G - For all. 8 ans+ - Restricted.
Setup menu operation Style:press *_ / _ toselectoneofAutomaticand Custom, whenyou select automatic, the other are disabIe and can notbe adjusted. Size: press q / _. to select one of Normal/Large Font: press _ / _ and Small. to select one of Default and from Front 1 to Font 7. Text Color: press 4. / _ to select one of Red/Green/Yellow/Magenta/Cyan/Black Text Opacity: press 4 / _ and White.
Setup menu operation V-Pos Press ENTER button to select it and then use • / _- to adjust the vertica( position of the picture. Phase Press ENTER button to select it and then use • / _- to adjust the phase of the picture. Clock Press ENTER button to select it and then use • / _- to adjust the clock of the picture. Note: Phase- This function allows you to remove any horizontal noise and clear or sharpen the image of characters.
Setup menu operation Press MENU on the front panel or on the remote control and then use 4 / _ to select the Feature menu in HDMI mode. Time Set Press & / !r button and then use ENTER the time set menu that allows you to set the time the TV will display. Sleep timer Press ENTER button to select it and then use q / ,, to adjust the amount of time before your TV turn off automatically press the ENTER that can select the 15min/30min/45min/60min/90min/120min/180min/240min and and OFF.
Setup menu operation Title: DVD Video discs are usually divided into several numbered sections called titles. Chapter: A title comprises smaller numbered sections called chapters. • Playing the DVD Player !. Press the 'INPUT' button to select 'DVD' mode, if no disc is inserted yet, the display shows 'No Disc'. 2.Insert a DVD with the printed side facing towards the rear of the TV/DVD Player (see below) CORRECT backside Note: of W The picture of the product may vary depending 3.
Setup menu operation Gettinq Started Carefully remove the TV / DVD and all other items from the box. You may wish to store the packaging for future use. Please read these instructions Compatible thoroughly before use. Discs The DVD player supports the following disc formats: _ 12cm DVD Video Discs. 12cm Compact Disc Audio Discs. 12cm Still High Resolution WARNING! DO NOT INSERT OR PLAY 8CM DISCS, THEY WILL GET STUCK. • Basic Control Function Play/Pause 1.
Setup menu operation displayed. Chapter Selection During playback you can select different chapters of the DVD. • Press DVD-M to the root menu. • Press direction buttons or Next, PREVIOUS buttons to choose different chapters. Note: It is just for reference. • Press ENTER button to confirm. Audio Configuration Some DVDs are recorded with multiple audio channels. These can be used for different languages or for commentaries.
Setup menu operation .....: : : " " ii :i i ¸¸¸ i;;: :: : i ¸ ii i ;" " _i_!_i_!_i_!_i_!_!_!i!_!_!_!i!_ii!_ii!_!_!i!_!i!_i!_ii!_i_!_!_!_i_ii!_!i!_!_!_!_!_!_!_i_!_i_!_!i!_!_!_!i!%_!i!_!i_!_!_!_!_i!_!_!i!_!i!_!i!_!_!_!_!_!_!_!_!_!_i_!_!_!_i_!_i_!_i_!_i_!_i_!_i_!_i_!_i_!_i_!_i_!_i_!_i_!_i_!_i_!_i_!_i_!_i_!_i_!_i_!_i_!_i_!_i_!_i_!_i_!_i_!_i_!_i_!_i_!_ b. Press "_'iA"to choose the items, then enter the desired already when the desired item becomes item with ENTER button. It has been set red.
Setup menu operation ! ii!!!!!!iiiil ,Iiliiiiii:i ,iiiiiii,ii!iiii,ii!i :ii!ii iiiii ii! !i!i!i!i!iiiiii!iiiiiii i iiiii!ii!!!!! ii i!!ii!i!!iii ! ii b. Press "_'iJ,"to choose the items, then enter the desired already when the desired item becomes item with ENTER button. It has been set red. Note: Press Left button to get back the previous menu. c. Press SETUP to exit the menu. d. The items of the menu as below: Downmix: Preference choose the downmix mode. There is only one item--stereo.
Setup menu operation Disc Menu: set the default language of Disc menu. Parental: movies rated higher than the level set will not be played by selecting a certain access level. The parental lock can only be changed after input the correct password. Note: This function is available only when the discs have rating encoded It will ask a password 136900. when you select a level except on. for Adult.
Appendix Identifying Problems If there are any problems using the product, please first consult the list below. If the list beIow does not solve the problem, call our Customer Service Center immediately. Setup and Connection The TV won't turn on Check your power cable connection. • t can't view the Basic channels. Check the connection of the antenna cable • t want to view cable channels. Register with your local cable company then connect their receiver to your TV.
Appendix • Disfunctioning channels. Check if the channel has been selected correctly. Try changing the position of the antenna. • Picture with white and black dots. Check if your antenna is damaged or any connections are broken. Replace your antenna • Only certain channels are in black and white Check if the program is being broadcast in black and white Try to check the hue or contrast. • The Sub-Screen is black. Check the power of the external device connected to the TV.
Appendix • The PC Screen continually appears and disappears. Check the connection between the TV and the computer and see if the connector is Iocked. • A 'There is no signal "message appears. This happens if the signal from the video card is exceeded for the maximum resolution or frequency of the TV. Try to set the maximum resolution or frequency for the TV.
Appendix Wall Mounting Wall mounting(unit: mm) Screw Diameter(unit: 405X200 Remark: The specification NOTE: Wall mount bracket vary depending Specification ram) Screw Length(unit: M5 of screw mm) 14 is just used on the back unit. is not included with TV and mounting on brand and size of bracket. that came with wall mount for specific Customer information of wall mount bracket should consult bracket on how to mount bracket mounting to wall may instructions to wall.
Appendix UNIVERSAL REMOTE CONTROL For Universal Remote and refer to your Universal operate Proscan CODE LIST Control brands listed below, please use accompanying Remote Control User Manual for basic instruction Proscan for changing codes TV code to model.
Appendix TV SPECIFICATION Model 37LB30QD Diagonal display size 37 inches Television system American TV standard ATSC/NTSC Audio multiplex BTSC system Channel coverage PC mode VHF: 2~13 UHF: 14~69 CATV:l~125 system, Built in DVD Combo ~6 ~1 Digital Terrestrial Broadcast (8VSB): 2 9 Digital cable (641266 QAM): t 35 640x480/60Hz,800x600/60Hz,1024x768/60Hz YPbPr/YCbCr mode 4801/60 Hz,480P/60 Hz,720P/60Hz,t0801/60 Hz HDMI Mode 4801/60 Hz,480P/60 Hz,720P/60Hz,t0801/60 Hz Resolution 1366x768
