Manual

Preparation for using your new TV
Connectingto a computer
You can use your TV as a monitor/speakersfor your computer by'connecting through its 15pin standard RGB
interface and PC audio interface(AUDIO INPUT4).Connect the devices as shown below.
PC/NB_
Tospeaker I T ToVGA
RGB line
Audioline
HDMI 2
HDM' A D, NV A,.......... ÷ ,OPT,OALANTT
NOTE: PCmode support resolution: VGA, SVGA, XGA.
Connecting to an antenna
Toenjoy the televison program transmitted by your local TV station, you need an indooror outdoor antenna
(not supplied). Perfect picture quality requires a good signal so the outdoor antenna is necessary. Ifyou are a
subscriber of your local CATVnet, the outdoor or indoor antenna is not needed. Connect the equipments as the
following.
ANTENNASOCKET
ANT75Q
Plug (not supplied)
COAXIAL CABLE (750)
_ TWIN-LEAD FEEDER
(300_)
Adaptor (not suppl
"_ Loosen the screw 2, insert the feeder in
The signal comes from:
An outdoor antenna
An indoor antenna
CATV net
3, Tighten the screw
-7-