Specifications

AUTO PLAY
This feature allows the VCR to automatically start playing when
you insert a tape with the safety tab removed. Press 2 to switch
between ON or OFF.
• Select ON if you want a tape with its safety tab removed to
start playing automatically when the tape is inserted.
• Select OFF if you do not want a tape with its safety tab
removed to start playing automatically.
AUTO TVNCR
This feature controls whether the TV/VCR switch changes
automatically to the VCR mode, when the VCR is turned on.
Press 3 to switch between ON and OFE
• Select ON if you want the VCR to switch to the VCR mode
when the VCR is turned on or a cassette is inserted. This
only applies if you connect the IN FROM ANT. and OUT
TO TV jacks of your VCR and TV and watch your VCR on
channel 3 or 4 of your T_Z
• Select OFF if you want the VCR to remain in the TV mode.
This is useful if you watch your VCR on the TV's video
input and you don't want your antenna/cable signal
interrupted by the VCR.
ENERGYSAVER
By default, this VCR automatically turns off after two hours of
inactivity. Press 4 to change the time delay or to disable the
feature.
• OFF: The VCR will remain turned on until you shut it off.
• 1:00, 2:00, or 3:00: The VCR turns off after one, two, or
three hours of inactivity.
Thirty seconds before shutting off, the VCR will warn you with
a screen reading, "The VCR will turn off in 30 seconds. Press
any key to cancel."
If you use the VCR's tuner instead of your TV to tune channels,
you may want to turn this feature off.
Auto TV/VCR
PressingTV.VCR on theVCR
(ANTENNA on remote) will still
switch between the VCR and TV
modes.
VCR mode: VCR indicator in the
display panel lights.
TV mode: VCR indicator turns off.
20