Specifications

INDEX SEARCH
The VCR has a "VHS Index Search System" that automatically
records an index mark on the tape every time you start a
recording. During playback you can locate the program you
want to play by the number of index marks or by scanning. The
VCR will search forward or reverse from the location you are on
the tape.
TO SEARCH:
1. Press STOP.
.
3.
4.
Press SEARCH on the remote to display the INDEX SEARCH
screen on the TV screen.
if you want to search through a certain number of index
marks, press two number buttons to enter the number of
marks you want to search. Press CLEAR on the remote to
correct an entry.
Press FORWARD (FWD) to search forward or REVERSE
(REV) to search in reverse. The VCR will locate your index
mark and begin playback. If you did not enter a specific
index number, the VCR will locate the next index mark and
begin playback.
5. Press STOP to stop index searching.
Some index marks may be missed by the VCR:
• A mark too close to your location on the tape.
• The mark at the beginning of a recorded segment of five
minutes or less.
• The first index mark on the tape when you start at the
beginning of the tape.
ZERO SEARCH
The Zero Search feature enables the VCR to quickly return to a
counter reading of 0:00:00 anywhere on the tape. This is
especially convenient when you want to repeat a segment of the
tape several times.
1. Go to the beginning of the program you wish to return to.
2. Press CLEAR twice to reset the counter to 0:00:00.
3. Continue playing the tape.
4. Press STOP.
)Continues on next page)
INDEX SEARCH
Press REV or FWD
to begin scanning
OR
enter a specific
index number
Press SEARCH to exit
INDEX SEARCH
Searching for
index number 12...
Press STOP to cancel
INDEX SEARCH
Searching for
index marks...
Press STOP to cancel
53