Specifications

tContinul,d triJr_l {irevtolts _laglfl
5. Press SEARCH on the remote until the ZERO SEARCH screen
appears on the TV screen.
6. Press REVERSE (REV) to return to 0:00:00 on the tape.
7. Press STOP to stop zero searching.
PRO-TECT PLUS TM LOCKING
FEATURE
To disable the usage of the VCR, or to protect your timer
recordings, you can lock the VCR so that the buttons on the
VCR or remote won't work.
To Lock: Press and hold either the remote control's
ON °OFF, VCR1, or VCR2 button (whichever controls your
VCR) until LOCK appears in the display. LOCK appears
when the feature is activated and if you attempt to turn on
the VCR while the feature is on.
To unlock the feature and turn on the VCR: Press and hold
either the remote's ONoOFF, VCR1, or VCR2 button
(whichever button your VCR is set to respond to) until LOCK
disappears.
ZERO SEARCH
Current tape counter is
2:17:25
Press REV to go to
0:00:00
Press SEARCH to exit
ZERO SEARCH
Searching for
0:00:00...
Press STOP to cancel
TRACKING
Your VCR has automatic tracking which removes the streaks or
noise from the picture. Automatic tracking is activated when you
insert a tape or turn on the VCR. Occasionally you may need to
manually adjust tracking, especially if the tape was recorded on
a different VCR. Use the TRACKING buttons to remove the
streaks or noise. You can also use tracking when you PAUSE a
tape to reduce jittering of the picture.
_When you manually adjust the picture, automatic tracking is
turned off. To turn automatic tracking back on, eject the tape
and reinsert it.
Tracking has no effect during recording--only playback.
LockingYour VCR:
If a timer recording is
programmed, make sure yourVCR
is turned ofT.Locking yourVCR
prevents theVCR from being
accidentally turned on.
54