MSDS

Page 2 of 3
6. ACCIDENTAL RELEASE MEASURES:
Spill Procedures
Use cautious judgment when cleaning up large spills. Respirator & protective equipment as
appropriate. Dike & contain material. Soak up residue with absorbent (clay, sand) materials
and dispose of properly.
7. HANDLING AND STORAGE:
Handling
Use with adequate ventilation. Avoid contact with eyes, skin and clothing. Avoid breathing (dust, vapor,
mist, gas). Keep container closed when not in use.
Storage
Store in a cool, dry place away from open flames, high temperatures and incompatible materials. Protect
from sunlight. Ambient room temperature storage (70F/21C).
8. EXPOSURE CONTROL/PERSONAL PROTECTION:
EYES
SKIN
VENTILATION
OTHER
Safety glasses/goggles with
side shields
Chemical resistant gloves
Fresh air source or
mechanical, as needed.
None known
9. PHYSICAL & CHEMICAL PROPERTIES:
Appearance:
Gray putty.
Odor:
Mild epoxy odor.
Boiling Point:
>500 F (> 260 C)
Specific Gravity (H
2
O=1):
1.17
Solubility in Water:
Negligible.
Melting Point:
NE
Vapor Density (Air=1):
NE
Vapor Pressure (mm Hg):
0.03 @ 77 F (25 C)
Evaporation Rate (Butyl
acetate=1): NE
Volatile Organic Compounds-VOC
(less exempt): 0 g/L
10. STABILITY & REACTIVITY:
Stable: __X__ yes ____ no
Hazardous Polymerization: _____ may occur __X__ may not occur
Incompatible materials:
Strong oxidizing agents, acids and bases.
Conditions to avoid:
Keep away from open flames & high temperatures. Do not store with incompatible
materials.
Hazardous decomposition
products:
Oxides of carbon and nitrogen.
11. TOXICOLOGICAL INFORMATION: Low order of oral toxicity. Unlikely to be an inhalation hazard due to low
volatility. May cause skin sensitization with prolonged contact.
12. ECOLOGICAL INFORMATION: May cause long-term adverse effects in the aquatic environment. Do not flush
to sewer.
13. DISPOSAL CONSIDERATIONS:
Cure by mixing with equal portion of paired component for non-hazardous solid waste disposal. Do not empty into
drains, dispose of unreacted material and container at hazardous or special waste collection point.
14. SHIPPING:
Product ID
Instant Gas Tank & Radiator Repair – resin - 62020
DOT
Not restricted
IATA
Not restricted
IMDG
Not restricted
MATERIAL SAFETY
DATA SHEET