MSDS

Page 2 of 3
Unusual
Fire/Explosion
Hazards
DO NOT BREATHE FUMES. Unidentified fumes & vapors may be toxic.
6. ACCIDENTAL RELEASE MEASURES:
Spill Procedures
Use cautious judgment when cleaning up large spills. Respirator & protective equipment as
appropriate. Dike & contain material. Soak up residue with absorbent (clay, sand) materials
and dispose of properly.
7. HANDLING AND STORAGE:
Handling
Use with adequate ventilation. Avoid contact with eyes, skin and clothing. Avoid breathing (dust, vapor,
mist, gas). Keep container closed when not in use. Do not take internally.
Storage
Store in a cool, dry place away from open flames, high temperatures and incompatible materials. Protect
from sunlight. Ambient room temperature storage (70F/21C).
8. EXPOSURE CONTROL/PERSONAL PROTECTION:
EYES
SKIN
VENTILATION
OTHER
Safety glasses/goggles with
side shields
Chemical resistant gloves
Fresh air source or
mechanical, as needed.
None known
9. PHYSICAL & CHEMICAL PROPERTIES:
Appearance:
Black putty
Odor:
Mild odor.
Boiling Point:
NE
Specific Gravity (H
2
O=1):
NE
Solubility in Water:
Insoluble.
Melting Point:
NE
Vapor Density (Air=1):
NE
Vapor Pressure (mm Hg):
NE
Evaporation Rate (Butyl
acetate=1): NE
Volatile Organic Compounds-VOC
(less exempt): 0 g/L
10. STABILITY & REACTIVITY:
Stable: __X__ yes ____ no
Hazardous Polymerization: _____ may occur __X__ may not occur
Incompatible materials:
Strong oxidants, amines especially when hot.
Conditions to avoid:
Keep away from open flames & high temperatures. Do not store near large masses
of epoxy resins.
Hazardous decomposition
products:
Carbon monoxide, carbon dioxide, and nitrogen oxides.
15. TOXICOLOGICAL INFORMATION: May cause allergic skin reaction with prolonged contact. May aggravate
pre-existing skin/eye/lung conditions. May be harmful if swallowed.
16. ECOLOGICAL INFORMATION: Do not flush to sewer.
17. DISPOSAL CONSIDERATIONS:
Cure by mixing with equal portion of paired component for non-hazardous solid waste disposal. Do not empty into
drains, dispose of unreacted material and container at hazardous or special waste collection point.
18. SHIPPING:
Product ID
Instant Gas Tank & Radiator Repair – hardener - 62020
DOT
Not restricted
IATA
Not restricted
IMDG
Not restricted
MATERIAL SAFETY
DATA SHEET