MSDS
9420 Santa Anita Avenue
Rancho Cucamonga, CA 91730
(909) 987-0550 ٠ Corp. Office: (800) 538-3091
Fax: (909) 987-0490٠ www.pacertechnology.com
Page 1 of 3
FOR CHEMICAL EMERGENCY ONLY:
1. PRODUCT
IDENTIFICATION:
2. COMPOSITION/INGREDIENTS:
3. HAZARDS IDENTIFICATION: Emergency Overview
HMIS
NFPA
Clear paste with acetic acid (vinegar) odor. CAUTION: On contact, product
causes irritation. Use in well-ventilated area. Avoid contact with eyes and
skin. Inhalation irritant. Ingestion may cause digestive discomfort.
KEEP OUT OF REACH OF CHILDREN.
Health
Flammability
Reactivity
Physical Hazard
1
1
0
1
1
0
Toxicity
Product releases acetic acid during cure – vapors and paste may be irritating. Prolonged or
repeated skin contact may cause dermatitis in sensitive individuals. Traces of formaldehyde
may form if heated in air above 300F (149C). Keep vapor concentration <30mg/m
3
(OSHA)
TWA or STEL <45mg/m
3
.
Primary routes of
entry
Inhalation Skin Eyes Ingestion
X X X
Signs/Symptoms
of Exposure
Inhalation
May irritate mucous membranes.
Skin
Irritation possible.
Eyes
Vapors are irritating.
Ingestion
Digestive discomfort.
4. FIRST AID MEASURES:
Inhalation
Remove to fresh air. Get medial attention if ill effects persist.
Skin
Remove contaminated clothing and wash affected areas with soap and water. Seek medical advice if
irritation persists.
Eyes
Immediately flush eye with water for 15 minutes and seek medical advice.
Ingestion
No first aid should be necessary, however, consult with a physician as a precaution.
5. FIRE FIGHTING MEASURES: FLASH POINT: >250
0
F/>100
0
C (TCC) LEL: NE UEL: NE
Extinguishing
Media
Dry chemical, foam or carbon dioxide.
Special Fire
Fighting
Procedures
Firefighters should wear self-contained breathing apparatus and protective equipment.
Hazardous
Products of
Combustion
Silicon dioxide, carbon oxides and traces of incompletely burned carbon compounds.
Formaldehyde.
Unusual
Fire/Explosion
Hazards
None known.
Product ID
Clear RTV Silicone Instant Gasket – 80066
CHEMICAL NAME
CAS #
OSHA PEL
ACGIH TLV
Other Limits
Wt. %
Poly (dimethylsiloxane, hydroxyl terminated)
Hydrotreated middle petroleum distillates
Silica (amorphous)
Methyltriacetoxysilane*
Ethyltriacetoxysilane*
70131-67-8
64742-46-7
7631-86-9
4252-34-3
17689-77-9
NE
5 mg/m
3
6 mg/m
3
dust
NE
NE
NE
NE
10 mg/m
3
dust
NE
NE
*Provide ventilation
to control acetic acid
released upon
contact with water –
OSHA PEL: 10 ppm
TWA
>60
5-10
5-15
1-3
1-3
US & CANADA: (800) 424-9300 Int’l & Wash. DC: (703) 527-3887
MATERIAL SAFETY
DATA SHEET