MSDS

Page 2 of 3
6. ACCIDENTAL RELEASE MEASURES:
Spill Procedures
Scrape up and place in container fitted with a lid for proper disposal. Do not allow large
quantities to enter drains.
7. HANDLING AND STORAGE:
Handling
Use with adequate ventilation. Use reasonable care and caution – avoid skin & eye contact and
breathing vapors. Wash hands with soap and water after use. Launder contaminated clothing before
reuse.
Storage
Store below 90
0
F (32
0
C). Store tightly closed away from heat sources in well-ventilated area.
8. EXPOSURE CONTROL/PERSONAL PROTECTION:
EYES
SKIN
VENTILATION
OTHER
Safety glasses/goggles with
side shields.
Rubber or plastic gloves for
repeated/prolonged
contact.
Local exhaust to maintain
vapor concentration below
exposure limits.
Apron to protect skin and
clothing.
9. PHYSICAL & CHEMICAL PROPERTIES:
Appearance:
Red paste.
Odor:
Acetic acid – (vinegar-like).
Boiling Point:
NA
Specific Gravity (H
2
O=1):
1.00
Solubility in Water:
Less than 0.1%
Melting Point:
NA
Vapor Density (Air=1):
>1
Vapor Pressure (mm Hg):
< 5 @ 77
0
F
Evaporation Rate (Butyl
acetate=1): NA
Volatile Organic Compounds-VOC
(less exempt): <7%
10. STABILITY & REACTIVITY:
Stable: _X_ yes ____ no
Hazardous Polymerization: _____ may occur _X_ may not occur
Incompatible materials:
Oxidizing materials; air or moisture cause curing with acetic acid vapors being
formed.
Conditions to avoid:
Exposure to air or moisture until ready to use.
Hazardous decomposition
products:
Silicon dioxide, carbon dioxide, traces of incompletely burned carbon products.
Formaldehyde.
11. TOXICOLOGICAL INFORMATION: Irritating to eyes, skin and mucous membranes. Prolonged or repeated
contact may cause dermatitis. Avoid breathing vapors, especially when heated above 150
0
C.
12. ECOLOGICAL INFORMATION: Unlikely to become a significant atmospheric contaminant. Do not allow to
enter drains.
13. DISPOSAL CONSIDERATIONS:
Dispose of product and packaging in accordance with local, regional and national regulations.
14. SHIPPING:
Product ID
Red RTV Silicone Instant Gasket – 80726
DOT
Not restricted.
IATA
Not restricted.
IMDG
Not restricted.
MATERIAL SAFETY
DATA SHEET