LED Diamond Beam 5 User Manual LED Diamond Beam 5 5 x 7 watt LEDS www.showtech.com.
LED Diamond Beam 5 Table of Contents 1. Safety instructions…………………………………………………………3 1.1 Overhead rigging …………………………………………………….4 1.2 Power Connection …………………………………………………..6 1.3 Cleaning and Maintenance ……………………………………..6 2. Menu Navigation ............................................................7 3. DMX Allocation ..............................................................10 4. Technical Specifications ..................................................
LED Diamond Beam 5 1. Safety Instructions FOR SAFE AND EFFICIENT OPERATION Be careful with heat and extreme temperature. Avoid exposing it to direct rays of sun near a heating appliance. Do not put it in a temperature below 41°F/5°C, or exceeding 95°F/35°C. Keep away from humidity, water and dust. Do not place the set in a location with a high humidity or lots of dust. Containers with water should not be placed on the set.
LED Diamond Beam 5 When not using the unit for an extended period of time be sure to disconnect the plug form the receptacle. 1.1 . Overhead Rigging This item must be built in a way that it can hold 10 times more of its weight for 1 hour without causing any damages. The installation must be secured with a secondary safety attachment. The Safety attachment has to be constructed in a way that no part of the installation can fall down.
LED Diamond Beam 5 DANGER OF FIRE! When installing the device, make sure there is no highly-flammable material (decoration articles, etc) within a distance of min. 0.5m. Mount the projector with the mounting bracket to your trussing system using an appropriate clamp. For overhead use, always install a safety-rope that can hold at least 10 times the weight of the fixture. You must only use safety –ropes with quick links with screw cap.
LED Diamond Beam 5 1.2. Power Connection !! CAUTION !! Never leave this device running unattended!! Every person that is involved with this item has to be qualified!! Connect item with main plug. The voltage and frequency must exactly be the same as stated on the device. The power plug must always be inserted without force. 1.3. Cleaning and Maintenance Please make sure that safety-relating and machine-technical installations are inspected by a skilled person once a year. 1. 2. 3.
LED Diamond Beam 5 2.
LED Diamond Beam 5 Auto Show 7 Auto Show 8 Auto Show 9 Auto Show 10 Auto Show 11 Auto Show 12 Dimmer Mode Allows the user to select from 4 options of dimming speeds Off Dimmer Speed off Dimmer 1 Dimmer Speed Fast Dimmer 2 Dimmer Speed Medium Dimmer 3 Dimmer Speed Slow Back Lite On LCD Backlight will remain on Adjusts the setting of the LCD back light 10s LCD off after 10 seconds 20s LCD off after 20 seconds 30s LCD off after 30 seconds Test Auto Test Info Fixture Hours test function a
LED Diamond Beam 5 DMX Channel 4 Channel Mode 1 pixel + shutter + macros/speed Adjust the DMX mode on the unit 5 Channel Mode 5 pixels Master / Slave Master Master Mode Allows the unit to be set in slave mode to copy other units on DMX chain Slave Slave Mode 9
LED Diamond Beam 5 3.
LED Diamond Beam 5 4.0 Technical Specifications Power in: 100-240 VAC, 50/60Hz Power consumption: 45 W LED type: Cree 7W Cool White Number of LEDs: 5 pcs Beam angle: 125° Dimensions (L x W x H): 500 x 98 x 217 mm Weight: 3.