Warranty

295 D, boul. Industriel, Châteauguay (QC) J6J 4Z2 proslat.com 1-888-691-2944 // 450-691-2944 [e-mail]
OVERHEAD WARNING
Make sure that there are no obstructions to restrict operation of the bike lift.
USING THE BIKE LIFT
Hook the bike handlebar and seat with the hooks and be sure
the ropes are not twisted (for bulky items, attach nylon straps to
hooks). The bike can now be raised to the ceiling by the pulling
rope. The rope will lock in place with each pull, preventing the
bike from falling. For safety, tie the rope on the cleat and wind
the excess rope around it. DO NOT CUT THE ROPE.
KAYAK OR SIMILAR APPLICATION
For use with nylon straps, hang each end of the strap on one of
the hooks. You can adjust the length of the strap at the buckle.
LOWERING THE BIKE
Pull the rope down at 90° from ceiling bracket maintaining tension
on rope. The tension will keep the locking mechanism open and
the bike will be able to lower. Slowly let one rope out at a time as
the bike lowers. Once the bike is low enough, remove it from the
hooks and tie the rope back to the cleat.
PROSLAT HOIST WARRANTY
We guarantee our hoist against material and workmanship defects for 5years. This warranty does not include any cost related to installation or return of the hoist.
This warranty is valid provided that the maximum weight supported by the hoist does not exceed 100 pounds. The customer, installer or the dealer, releases PROSLAT
of all claims if the hoist has been loaded with more than mentioned above. The hoist MUST BE installed as described in the INSTALLATION INSTRUCTIONS.
This warranty does not cover corrosion, rust or discoloration of paint, or product failure due to misuse, abuse, faulty installation, alteration or any other failure not
related to defects in materials or workmanship.
DISCLAIMER OF LIABILITY
Proslat Inc. and its successors, distributors and dealers (hereafter SELLER) shall in no way be responsible for the product’s proper use and service. THE BUYER HEREBY
WAIVES ALL LIABILITY CLAIMS. The BUYER acknowledges that he/she is not relying on the SELLER’s skill or judgment to select or furnish goods suitable for any
particular purpose and that there are no liabilities which extend beyond the description on the face hereof and the BUYER hereby waives all remedies or liabilities,
expressed or implied, arising by law or otherwise, (including without any obligations of the SELLER with respect to merchantability and consequential damages) or
whether or not occasioned by the SELLER’s negligence. The SELLER disclaims any warranty and expressly disclaims any liability for personal injury or damages. The
BUYER acknowledges and agrees that the disclaimer of any liability for personal injury is a material term for this agreement and the BUYER agrees to indemnify the
SELLER and to hold the SELLER harmless from any claim related to the item of the equipment purchased. Under no circumstances will the SELLER be liable for any
damages or expenses by reason of use or sale of any such equipment. The SELLER assumes no liability regarding the improper installation or misapplication of its
products. It is the installer’s responsibility to check for proper installation and if in doubt, contact the manufacturer. These assembly guidelines will direct you through
the process of assembling a section of Proslat Inc product. Please keep in mind that they may not cover every assembly or installation scenario you may encounter.
Since each installation is unique in its performance requirements, the ultimate installation method used is the sole responsibility of the installer. Proslat Inc. disclaims
any liability or responsibility for the improper installation of this product. The purchaser is solely responsible for compliance with applicable local codes. Proslat Inc.
recom mends that all designs be reviewed by a licensed architect, engineer or local building ocial before installation.
Use two wood screws to mount the rope cleat to the wall. When the bike is up to
the ceiling, the excess rope should be stored in the cleat.
STEP 5