Installation Guide

WAVE Panel Installation Guide
Screw the Z-Clip to the panel using the included
machine screws.
NOTE: If you ordered additional Z-Clips for the
bottom of the panel for added security, repeat the
process for the additional Z-Clip set.
Next, attach the brackets to the wall using
appropriate anchors. The part of the clip that
lays flat against the wall should be on the
bottom. Drywall anchors maybe used if the total
working load limit meets the panel weight
requirements. Where possible, anchor to a
stud or other internal wall structure.
When all of the clips are installed, position the
panel against the wall with the panel clips
slightly higher than the wall clips and slide the
panel down until the clips are secure.
*For added security a dab of RTV adhesive in the clip
track before mounting the panel can be used on the clips
to keep them from sliding laterally.
View our youtube™ installation video by !
scanning the code with a smartphone or
tablet camera.
Step 1.
Step 2.
Step 3.
Included items per panel: !
2x - Z Clips !
2x - 8/24 machine screws