User's Manual
Table Of Contents
- Your Feedback Please
- How to Contact Us
- ProSoft Technology® Product Documentation
- Important Safety Information
- Recommended Antennas
- Antenna spacing requirements for user safety
- 1 Start Here
- 2 RLX2 Quick Setup
- 3 Planning the Network
- 4 Installing the Radios
- 5 Diagnostics and Troubleshooting
- 6 Detailed Radio Configuration / Diagnostics
- 7 RadioLinx Industrial Hotspot Browser
- 8 Reference
- 8.1 Product Overview
- 8.2 Compatibility with ProSoft RLXIB Series Radios
- 8.3 Dimensional Drawings
- Master Channel-Frequency Table
- 8.4 FCC Emission Regulations
- 8.5 Radio hardware
- 8.6 RLX2-IHA Detailed Specifications
- 8.7 RLX2-IHG Detailed Specifications
- 8.8 RLX2-IHNF Detailed Specifications
- 8.9 RLX2-IHW Detailed Specifications
- 9 Antenna Configuration
- 10 Support, Service & Warranty
- Glossary of Terms
- 802.11
- 802.11a
- 802.11b
- 802.11g
- 802.11i
- 802.11n
- Access Point
- Ad hoc Mode
- AES
- Amplifier
- Antenna
- ASCII
- Association
- Authenticate
- Authentication Server
- Band
- Bandwidth
- Base Station
- Baud Rate
- bps
- CACT
- Channel
- Channel Move Time
- Client, Radio Mode
- Client, Software
- Configuration PC
- dBi
- dBm
- DCE
- Decibel (dB)
- Default Gateway
- Device-to-Device Network (Peer-to-Peer Network)
- DFS
- DHCP
- Direct Sequence Spread Spectrum
- Directional Antenna
- Diversity Antenna
- DTE
- Dual Band
- EAP
- EIRP
- Encryption
- ESD
- ESSID
- Firmware
- Frequency Hopping
- Frequency Hopping Spread Spectrum
- Fresnel Zone
- Full-Duplex
- Gain
- Gateway
- Guard Interval (GI)
- Half-Duplex
- Hz
- IEEE
- IP Address
- Key
- LAN
- LED
- Line of Sight (LoS)
- Link point
- MAC ID
- Master device
- Mbps
- Megahertz
- MIC
- MIMO
- Modbus
- Modem
- Network
- Node
- Non-Occupancy Period
- Null Modem Cable
- Panel Antenna
- Parabolic Antenna
- Peer-to-Peer Network
- Point-Multipoint (Broadcast) Network
- Point-Multipoint (Modbus) Network
- Point-to-Multipoint
- Point-to-Point Network
- Poll
- Power Supply
- Protocol
- QoS
- Range
- Remote Access Point
- Remote device
- Repeater
- Repeater, Radio Mode
- RS-232
- RTU (Remote Terminal Unit)
- Sector Antenna
- Signal Diversity
- Signal Loss
- Signal Strength
- Simplex
- Site Survey
- Spectrum
- Spread Spectrum
- SSI
- Subnet Mask
- TKIP
- UART
- WAP
- WDS
- WEP
- Wi-Fi
- Wi-Fi CERTIFIED™
- Wi-Fi Interoperability Certificate
- Wi-Fi Protected Setup
- Wireless Gateway
- Wireless Network
- WLAN
- WPA
- WPA2
- Yagi Antenna
- Index
RLX2 Series ♦ 802.11a, b, g, n Reference
Industrial Hotspots User Manual
8.2 Compatibility with ProSoft RLXIB Series Radios
The RLX2 series radios are 100% functionally compatible with ProSoft’s legacy
RLXIB-IHA, RLXIB-IHG, and RLXIB-IHW radio models. This allows customers with
RLXIB series radios to add RLX2 radios to their existing networks without any
reconfiguration of existing assets or obsolescence issues. The main differences in
the RLX2 series radios are the following improvements:
1 Different enclosure size for more efficient heat dissipation.
2 Faster, more efficient electronics that consume less power.
3 Gigabit Ethernet.
4 MicroSD memory cards for configuration data storage.
5 Internal temperature sensor.
The RLX2 series radios will acquire additional functionality as new firmware features
are added. These new features will not be ported to the RLXIB radios, but the RLX2
radios will continue to work with RLXIB radios using their existing functionality.
The RLX2-IHNF is an 802.11n device that does not have an RLXIB series
equivalent. It cannot function as a repeater to ProSoft’s RLXIB-IHxN series radio
products. Specific differences by product are noted in the following table.
Specifications that have not changed between the RLXIB and RLX2 series products
are not listed.
RLXIB-
IHA
RLX2-
IHA
RLXIB-
IHG
RLX2-IHG
RLXIB-
IHW
RLX2-IHW
RLX2-IHNF
Dimensions
4.5/115
W x
4.6/117
H x
1.75/45
D
(inches/
mm)
5.82/14
8W x
4.64/11
8H x
1.48/38
D
(inches
/mm)
4.5/115W
x 4.6/117H
x 1.75/45
D (inches/
mm)
5.82/148W
x
4.64/118H
x 1.48/38D
(inches/
mm)
4.5/115W
x 4.6/117H
x 1.75/45
D (inches/
mm)
5.82/148W
x
4.64/118H
x 1.48/38D
(inches/
mm)
5.82/148W x
4.64/118H x
1.48/38D
(inches/mm)
Weight
1.1 lbs
(499g)
1.1 lbs
(499g)
1.1 lbs
(499g)
1.1 lbs
(499g)
1.06 lbs
(479g)
1.06 lbs
(479g)
1.1 lbs
(499g)
Typical Power
Consumption
< 9W
5.7W
< 9W
4.5W
< 6 W
4.5W
7.1W
Max Power
Consumption
9W
10W
9W
8W
6W
8W
9W
Active antenna
ports
1
1
1
1
1 Tx/Rx, 1
optional
Rx only
1 Tx/Rx, 1
optional
Rx only
1, 2, or 3,
MIMO or
independent
antennas
Ethernet Speeds
10/100
MBit
10/100/
1000
MBit
10/100
MBit
10/100/
1000 MBit
10/100
MBit
10/100/
1000 MBit
10/100/
1000 MBit
NET and MOD
Status LEDs
Fast Roaming
microSD card
Onboard
temperature
sensor
5 GHz band DFS
channels
Use RLXIB
Firmware Image
Use RLX2
Firmware Image
ProSoft Technology, Inc. Page 117 of 161
November 29, 2012