User's Manual

RadioLinx Industrial Hotspot Browser RLX2 Series ♦ 802.11a, b, g, n
User Manual Industrial Hotspot
7.1 Primary radio functions
Performing the following primary functions on any listed radio is done by right-
clicking the radio name.
Connect (page 92): Log in to the Radio Configuration / Diagnostic Utility to
configure a radio or check diagnostics.
Assign IP (page 37, page 92): Assign a temporary IP address to a radio.
Update Firmware (page 93): Update the version of firmware the radio uses.
Start Ping Session (page 94):
Wireless Clients (page 97): View a list of client radios
Ethernet Nodes (page 98): View a list of wired Ethernet nodes connected to the
network
Scan List (page 99): View a list of all the radios detected on the network
(including those from other vendors)
Port Table (page 100):
Event Log (page 100):
Properties (page 101): View the selected radio’s properties.
In addition, there are more options in the File menu.
 Print either a list of the radios' properties or a topology view.
 Change how the IH Browser scans for radios.
Page 88 of 161 ProSoft Technology, Inc.
November 29, 2012