User manual

MVI56-HART ♦ ControlLogix Platform Start Here
HART Multi-drop Master Communication Module User Manual
ProSoft Technology, Inc. Page 27 of 171
October 13, 2011
1.9 Connecting Your PC to the Module
With the module securely mounted, connect your PC to the Configuration/Debug port
using the RJ45-DB-9 Serial Adapter Cable and the Null Modem Cable included in the
package with the MVI56-HART module.
1 Connect the RJ45-DB-9 Serial Adapter Cable to the Null Modem Cable.
2 Insert the RJ45 cable connector from the RJ45-DB-9 cable into the
Configuration/Debug port of the module.
3 Attach the other end to the serial port on your PC.