User manual

MVI56-HART ♦ ControlLogix Platform Ladder Logic
HART Multi-drop Master Communication Module User Manual
ProSoft Technology, Inc. Page 55 of 171
October 13, 2011
3.1.3 Data Object (HARTData)
The HARTData object is defined in the example ladder logic to demonstrate how the data
from a module can be stored in the processor. This object can be used to temporarily
store a received data set. In this example, four data areas are set up; two for input data
(data received from the module) and two for output data (data to transfer to the module).
Within each of these two areas, an area for floating-point data and integer data is
defined. The following table describes the structure of the object.
Name Data Type Description
HART_IN_Float_vals REAL[100] Data area to floating-point data
HART_IN_Int_vals INT[100] Data area to hold integer data
HART_OUT_Float_vals REAL[100] Data area for output floating-point data
HART_OUT_Int_vals INT[100] Data area for output integer data