User manual

1560-PDP

PROFIBUS – SCANport Adapter

Please Read This Notice

Successful application of the 1560-PDP card requires a reasonable working knowledge

of the Allen-Bradley hardware to be interfaced with, and the application on which the

combination is to be used. For this reason, it is important that those responsible for

implementing the 1560-PDP satisfy themselves that the 1560-PDP and Allen-Bradley

hardware combination will meet the needs of the application without exposing personnel

or equipment to unsafe or inappropriate working conditions.

This manual is provided to assist the user. Every attempt has been made to assure that

the information provided is accurate and a true reflection of the product’s installation

requirements. In order to assure a complete understanding of the operation of the 1560-

PDP, the user should read all applicable documentation on the operation of the Allen-

Bradley hardware.

Under no conditions will ProSoft Technology, Inc. be responsible or liable for indirect or

consequential damages resulting from the use or application of the 1560-PDP product.

Reproduction of the contents of this manual, in whole or in part, without written

permission from ProSoft Technology, Inc. is prohibited.

Information in this manual is subject to change without notice and does not represent a

commitment of the part of ProSoft Technology, Inc. Improvements and/or changes in this

manual or the product may be made at any time. These changes will be made

periodically to correct technical inaccuracies or typographical errors.

PROFIBUS is a trademark of the PROFIBUS User Organization

WARNING

The 1560-PDP card will allow remote access to

commands in the Allen-Bradley drives and other

SCANport compatible devices. The user is

responsible for assuring that any applicable

regulations concerning the remote operation of the

equipment are adhered to.