User manual

1560-PDP
PROFIBUS – SCANport Adapter
21
E.2 : Adapter Status Image (Read from 1560-PDP)
Word Name Values Description
0 SCANport Status 0 = Offline
1 = Online
Indicates if 1560-PDP is logged
into the drive. If drive is
powered down or if SCANport
cable becomes disconnected,
the value will go to offline
1 Control/Reference
Command Counter
0 to
0xFFFF
This is a rollover counter which
increments each time the 1560-
PDP received a Status word
update from the SCANport
device
2 Datalink A update
counter
0 to
0xFFFF
This is a rollover counter which
increments each time the
Datalink A update is received
from the SCANport device
3 Datalink B update
counter
0 to
0xFFFF
This is a rollover counter which
increments each time the
Datalink B update is received
from the SCANport device
4 Datalink C update
counter
0 to
0xFFFF
This is a rollover counter which
increments each time the
Datalink C update is received
from the SCANport device
5 Datalink D update
counter
0 to
0xFFFF
This is a rollover counter which
increments each time the
Datalink D update is received
from the SCANport device
6 Parameter Read
Update Counter
0 to
0xFFFF
This is a rollover counter which
increments each time a Rad
Parameter command is
received from the SCANport
device
7 Parameter Write
Update Counter
0 to
0xFFFF
This is a rollover counter which
increments each time a Write
Parameter command is
executed
8
Profibus Status
(Future)
9 Product Revision Provides the firmware revision
level. The data should be
viewed in hex mode