User manual

1560-PDP
PROFIBUS – SCANport Adapter
5
2.4 LED Indications
NAME Color Status Indication
Green Steady Profibus connection is in place with the host
Steady Profibus connection is not good. Check that
the Profibus cable is connected to a host.
Also, verify that the Profibus network is
correctly terminated.
Profibus
Status
Red
Blinking Profibus connection is in place with the
host,but possibly a bad configuration has
been detected (Input or Output map
duplicated, or more than 5 map images
entered in configuration utility for this slave)
Green Steady SCANport connection if OK
Green Blinking Check cable connections. Indicates that the
1560 unit is not able to link up with the
drive’s SCANport. Make sure that the A-B
device supports Datalinks if the 1560
Datalinks are enabled.
SCANport
Status
Red Steady The SCANport connection has faulted.
Check configuration switch settings,
SCANport cable connections, cycle power.
Contact ProSoft factory support if problem
persists.
2.5 Dip Switch Settings
Example Switch Setting (Shipped Configuration)
Switch 8 7 6 5 4 3 2 1
SW1 1 0 0 0 0 1 0 1 Comm Fail Enabled
Node #5
SW2 1 1 0 0 0 0 0 0 All Datalinks enabled
No Bytes Swapping