Product specifications

Contents

Appendix C — Peer Cop Example

The Host PLC (984) must also have its dip switches set to Node Address

7 and a proper Modbus Plus cable connected between the PLC and the

1560-MBP.

Configuration Extension Blocks

This section is a PLC printout (using Modsoft) that shows how the PLC’s

Peer Cop is configured.

PEER COP

Timeout : 500 ms Total Links:1 Link Id:1 - Internal

On Error : CLEAR USED 20 OF 512 WORDS

Access to Node : 6

MODE REFERENCE LEN TYPE INDEX

SPECIFIC INPUT -

SPECIFIC OUTPUT -

GLOBAL INPUT 100001-100016 1 1

GLOBAL INPUT 400200-400208 9 BIN 2

GLOBAL INPUT -

TO ALL NODES ON LINK

GLOBAL OUTPUT 400100-400131 32 BIN

The 1560 MBP-1560 Dip Switch 2 Configuration is as follows:

Switch Position Description

1 On Set the 1560-MBP Node Address 6

2 Off

3On

4 Off

5 Off

6 Off

7 On Enable Global Data Control from a host. Allows

the Control and Reference words to be

obtained from the Host PLC Global Data Block

8 On Enables Drive fault on loss of Mobus Plus

communication