User manual

Contents ILX800-SMSG ♦ Micro800 Platform
User Manual SMS Text Plug-in Module for GSM Networks
Page 12 of 39 ProSoft Technology, Inc.
September 14, 2012
5 Lower the card holder clip and slide it to the left until it locks into place.
1.5 Installing the ILX800-SMSG Plug-in Module
Important: The Micro830 controller should be powered off when the plug-in module is installed on or removed
from the controller.
1 Orient the plug-in module so the antenna end is toward the front of the controller.
2 Align the plug-in module's three tabs with the three notches in the module slot on the
controller. Snap the plug-in module into place.
1.6 Installing an Antenna
An external antenna is required to connect the plug-in module to the cellular network. The
antenna should be rated for the following frequency bands:
890-960 MHz
1710-1880 MHz