User manual

49TPTQ-104C ♦ 48TQuantum Platform Reference
47TIEC 60870-5-104 Client
12TUser Manual
 Local rack - The module must be placed in the same rack as processor
 Compatible with all common Quantum programming packages, including
Concept (version 2.6 or higher), Unity Pro (version 2.2 or higher), ProWORX
(version 2.20 or later), and ModSoft
 Quantum data types supported: 0x, 1x, 3x, 4x
 High speed data transfer across backplane provides quick data update times
9.1.4 Hardware Specifications
Specification
Value
Backplane Current Load
1100 mA maximum @ 5 Vdc ± 5%
Operating Temperature
0°C to 60°C (32°F to 140°F)
Storage Temperature
-40°C to 85°C (-40°F to 185°F)
Relative Humidity
5% to 95% (without condensation)
Vibration
Sine vibration 4-100 Hz in each of the 3 orthogonal
axes
Shock
30G, 11 mSec. in each of the 3 orthogonal axes
Dimensions (HxWxD),
Approx.
250 x 40.34 x 103.85 mm
9.84 x 1.59 x 4.09 in
LED Indicators
Active Status
Ethernet port Status
Battery Status
Debug/Config Port Activity
Module Status
Debug/Configuration Port (Debug)
CFG Port (DEBUG)
DB-9M PC Compatible
RS-232 only
No hardware handshaking
Application Ports
Application Ethernet port
RJ45 Connector
Link and Activity LED indicators
Electrical Isolation 1500 V rms at 50 Hz to 60 Hz for 60
s, applied as specified in section 5.3.2 of IEC 60950:
1991
Ethernet Broadcast Storm Resiliency = less than or
equal to 5000 [ARP] frames-per-second and less than
or equal to 5 minutes duration
9.1.5 Functional Specifications
The PTQ-104C module sends data read/write commands to a server/slave on
the network.
The module has 4000 words of user defined internal register space that are
accessible to the protocol driver and to the Quantum processor memory. Any of
the supported database types can be individually located (within the total
database size limit of 4000 words) and each database point is mapped within the
module and can be assigned to one or more Groups. The supported IEC-870-5-
104 database point types are:
Database Type
Description
Event Generation
Point Size
M_SP_NA
Monitored single-point database
State Change
1 bit
ProSoft Technology, Inc. Page 107 of 136
March 4, 2013