User manual

PTQ-PDPMV1 ♦ Quantum Platform Configuring the Processor with Unity Pro
PROFIBUS DP Master Network Interface Module for Quantum User Manual
ProSoft Technology, Inc. Page 73 of 306
August 12, 2014
5 To view detailed information about the processor's memory configuration,
click VIEWER. The viewer offers tools to view the types of data stored at
specific addresses in the processor. Make note of memory areas that are
already allocated, and select an area of contiguous memory that be allocated
to the PTQ module.
3.1.4 Building the Project
Whenever you update the PTQ module's configuration, the PROFIBUS network,
or the processor, you must import the changed configuration from the module,
and then build (compile) the project before downloading it to the processor.
Note: The following steps show you how to build the project in Unity Pro. This is not intended to
provide detailed information on using Unity Pro, or debugging your programs. Refer to the
documentation for your processor and for Unity Pro for specialized information.
To build (compile) the project
1 Review the elements of the project in the Project Browser.
2 When you are satisfied that you are ready to download the project, open the
BUILD menu, and then choose REBUILD ALL PROJECT. This action builds
(compiles) the project into a form that the processor can use to execute the
instructions in the project file. This task may take several minutes, depending
on the complexity of the project and the resources available on your
computer.