Operating instructions

Configuring the Processor with Concept PTQ-MCM ♦ Quantum / Unity Platform
Modbus Communication Module
ProSoft Technology, Inc. Page 17 of 139
April 29, 2008
5 Click the add all button. A series of message boxes may appear during this
process. Click Yes or OK for each message that appears.
6 When the process is complete, open the File menu and choose Exit to save
your changes.
2.2 Create a New Project
This phase of the setup procedure must be performed on a computer that has
the Concept configuration software installed.
1 From your computer, choose Start / Programs / Concept V2.6 XL.EN /
Concept. This action opens the Concept window.
2 Open the File menu, and then choose New Project. This action opens the
PLC Configuration dialog box.