Operating instructions

Configuring the Processor with UnityPro XL PTQ-MCM ♦ Quantum / Unity Platform
Modbus Communication Module
ProSoft Technology, Inc. Page 37 of 139
April 29, 2008
4 Configuring the Processor with UnityPro XL
In This Chapter
 Create a New Project ............................................................................37
 Add the PTQ Module to the Project.......................................................39
 Build the Project ....................................................................................41
 Connect Your PC to the Processor .......................................................42
 Download the Project to the Processor ................................................. 44
The following steps are designed to ensure that the processor (Quantum or
Unity) is able to transfer data successfully with the PTQ module. As part of this
procedure, you will use UnityPro XL to create a project, add the PTQ module to
the project, set up data memory for the project, and then download the project to
the processor.
4.1 Create a New Project
The first step is to open UnityPro XL and create a new project.
1 In the New Project dialog box, choose the CPU type. In the following
illustration, the CPU is 140 CPU 651 60. Choose the processor type that
matches your own hardware configuration, if it differs from the example. Click
OK to continue.