Operating instructions

PTQ-MCM ♦ Quantum / Unity Platform Setting Up the ProTalk Module
Modbus Communication Module
Page 48 of 139 ProSoft Technology, Inc.
April 29, 2008
5.1.2 Inserting the 1454-9F connector
Insert the 1454-9F connector as shown. Wiring locations are shown in the table:
5.1.3 Install the ProTalk Module in the Quantum Rack
1 Place the Module in the Quantum Rack. The ProTalk module must be placed
in the same rack as the processor.
2 Tilt the module at a 45° angle and align the pegs at the top of the module with
slots on the backplane.