User manual

Diagnostics and Troubleshooting PTQ-104S Rev2 ♦ Quantum Platform
User Manual IEC 60870-5-104 Server for Quantum
Page 114 of 195 ProSoft Technology, Inc.
February 22, 2013
3 Press [?] to open the Main Menu.
Important: The illustrations of configuration/debug menus in this section are intended as a general
guide, and may not exactly match the configuration/debug menus in your own module.
If there is no response from the module, follow these steps:
1 Click to configure the connection. On the Connection Setup dialog box, select
a valid com port or Ethernet connection type.
2 Verify that the null modem cable is connected properly between your
computer’s serial port and the module. A regular serial cable will not work.