User manual

PTQ-104S Rev2 ♦ Quantum Platform Start Here
IEC 60870-5-104 Server for Quantum User Manual
ProSoft Technology, Inc. Page 17 of 195
February 22, 2013
This action opens the DIAGNOSTICS dialog box.
3 Press [?] to open the Main Menu.
Important: The illustrations of configuration/debug menus in this section are intended as a general
guide, and may not exactly match the configuration/debug menus in your own module.
If there is no response from the module, follow these steps:
1 Click to configure the connection. On the Connection Setup dialog box, select
a valid com port or other connection type supported by the module.
2 Verify that the null modem cable is connected properly between your
computer’s serial port and the module. A regular serial cable will not work.
3 On computers with more than one serial port, verify that your communication
program is connected to the same port that is connected to the module.