User manual

PTQ-104S Rev2 ♦ Quantum Platform Reference
IEC 60870-5-104 Server for Quantum User Manual
ProSoft Technology, Inc. Page 183 of 195
February 22, 2013
Transmission of Integrated totals
(Station- or object-specific parameter, mark "X" if function is only used in the
standard direction, "R" if only used in the reverse direction, and "B" if used in
both directions)
 Mode A: Local freeze with spontaneous transmission
 Mode B: Local freeze with counter interrogation
 Mode C: Freeze and transmit by counter-interrogation commands
 Mode D: Freeze by counter-interrogation command, frozen values
reported spontaneously
 Counter read
 Counter freeze without reset
 Counter freeze with reset
 Counter reset
 General request counter
 Request counter group 1
 Request counter group 2
 Request counter group 3
 Request counter group 4
Parameter loading
(Object-specific parameter, mark "X" if function is only used in the standard
direction, "R" if only used in the reverse direction, and "B" if used in both
directions)
 Threshold value
 Smoothing factor
 Low limit for transmission of measured value
 High limit for transmission of measured value
Parameter activation
(Object-specific parameter, mark "X" if function is only used in the standard
direction, "R" if only used in the reverse direction, and "B" if used in both
directions)
 Act/deact of persistent cyclic or periodic transmission of the addressed
object
Test procedure
(Station-specific parameter, mark "X" if function is only used in the standard
direction, "R" if only used in the reverse direction, and "B" if used in both
directions)
 Test procedure