User manual

RLXIC-SG ♦ Intelligent Cellular Activating RLXIC-SG on your cellular provider
RadioLinx Intelligent Cellular Serial Modem for Global GPRS/GSM User Manual
Page 20 of 136 ProSoft Technology, Inc.
May 29, 2009
2 Select TCP, UDP, or PPP.
Enter the connection information.
o For UDP or TCP, enter 192.168.13.31 as the IP address.
o For PPP, select the COM port to which the modem is connected.
Note: The simplest way to connect to the modem is through a USB cable. Refer to Universal Serial
Bus (USB) (page 41) for information on how to install the necessary drivers for a USB connection.
3 Enter the password. The default password will be entered for you.
4 Click OK.
3.2.3 Enter the APN
1 Select GPRS from the menu on the left side of AceManager (under "Groups")
2 Type your APN in the New Value field of *NETAPN.
Optional: If you need to configure your modem for a custom APN, after entering the APN, there is
additional information you will need to enter.