User manual

Data Communication and Host Modes RLXIC-SG ♦ Intelligent Cellular
User Manual RadioLinx Intelligent Cellular Serial Modem for Global GPRS/GSM
ProSoft Technology, Inc. Page 55 of 136
May 29, 2009
7.2.4 Telnet Mode
In AceManager you can configure Telnet operation.
If you need to change the port for Telnet (for example, you have the default port
blocked on your firewall), the option is on the O
THER tab. The default telnet port
is
2332. You can also change the Telnet timeout, if the connection is idle, default
2 minutes.
7.3 Serial Modes
7.3.1 PPP
In PPP mode, the RLXIC-SG acts as a PPP server, providing an IP address, and
DNS servers (if available) to the connected device or computer.
PPP mode is entered from the AT mode by using any of the following
commands:
 AT\APPP
 ATDT10.0.0.1
 ATDT10001
 ATD#19788 or #777 *99***1#
 CLIENT