User manual

SNMP : Simple Network Management Protocol RLXIC-SG ♦ Intelligent Cellular
User Manual RadioLinx Intelligent Cellular Serial Modem for Global GPRS/GSM
ProSoft Technology, Inc. Page 83 of 136
May 29, 2009
10.2.3 User Name and Password
The user name is "user". The user name cannot be changed. The RLXIC-SG's
password is used as the SNMP password (default is "12345").
To change the password in the RLXIC-SG, select Modem from the top menu line
in AceManager.
The current password will be pre-entered. As you type the new password and
confirm it, the characters you type will be obscured by "x". For the password, you
can use numbers, letters, and/or punctuation.
Caution: The password is case sensitive. "drowssaP" is not the same as "drowssap".
10.2.4 Trap Destination
*SNMPTRAPDEST needs to be set with the destination IP and port. If either are
set to zero or empty, SNMP traps are disabled.
Note: Traps are sent out according to the SNMP security level (that is, if the security level is 2,
traps will be authenticated and encrypted). Currently, the only trap supported is LinkUp.
10.2.5 Community String
The community string can be configured using *SNMPCOMMUNITY. The default
is "public".