User manual

Configuration Commands RLXIC-SV ♦ Intelligent Cellular
User Manual RadioLinx Intelligent Cellular Serial Modem for the Verizon Wireless CDMA Network
ProSoft Technology, Inc. Page 97 of 146
May 29, 2009
11 Configuration Commands
In This Chapter
 Info (information) ...................................................................................97

Status ....................................................................................................99
 Common..............................................................................................102

Logging................................................................................................129
 Telemetry/Addr List .............................................................................130

1x/EV-DO ............................................................................................132
The configuration commands (AT commands) in this chapter are arranged
according to their placement in AceManager.
Note: Some commands can only be configured using a terminal emulation and typed AT
commands. Some commands also require PassThru mode.
Tip: You can use a fully qualified domain name instead of an IP address for most configuration
options calling for an IP address if your RLXIC-SV is configured to use DNS. DNS settings
frequently come directly from your cellular provider while your RLXIC-SV is registering on the
cellular network, and receiving its IP address.
11.1 Info (information)
The commands in the "Info" group have read-only parameters. They only provide
information about the modem. Some of the information displayed in this group
does not correspond directly to AT commands.
*DEVICEID?
The 64-bit device ID the modem uses to identify itself to the cellular network.